Panasonic CF-08TX1A1M Service Manual

Also see for CF-08TX1A1M: Operating instructions

Contents

Panasonic CF-08TX1A1M Service Manual Manual pdf 26 page image

9-23. Remove the 12 Screws .4. Remove the Cable Hold Sheet while opening the RearCabinet ASS'Y slowly.5. Remove the Cable hooked on the Lamp Cable Spring.6. Remove both the Inverter and the Inverter Case.7. Remove the Connector (CN6) connected to the IO PowerPCB.8. Open the Rear Cabinet.9. Remove the Clamper and the Connectors (CN2, CN6)connected to the Main PCB.10. Remove the Display Unit.Screws :DXSB2+6FNLScrews :DXYN26+J6FNL9.1.4. Removing the Main PCB1. Disconnect the seven Cables from the Connectors(CN3,CN4,CN7,CN9,CN10,CN12,CN13).2. Remove the four Screws .3. Remove the Main PCB.Screws : XSB2+4FNL9.1.5. Removing IO Power PCB1. Disconnect the Cable from the Connector (CN8).2. Remove the Edge Sheet.3. Remove the eight Screws .4. Remove the IO Power PCB.Screws :XSB2+4FNLLamp Cable SpringCable Holder SheetRear CabinetIO Power P.C.B.InverterConnector(CN6)CableDisplayUnitConnector(CN2)Connector(CN6)Main P.C.B.ClamperConnector(CN7)Connector(CN3)Connector(CN13)Connector(CN4)Connector(CN9)Main P.C.B.Connector(CN12)Connector(CN10)Connector(CN8)IO Power P.C.B.Edge Sheet