Panasonic BRS1D Service Manual

315.2. FUNCTIONS Description5.3. AGING MODE DescriptionFunction Name Function DescriptionTray - Open When press [LD_OPEN], LD Motor drive until detect LOAD-SW = LOTray - Close When press [LD_CLOSE], LD Motor drive until detect LOAD-SW = LCTrv - Forward When press [TRV FW], Trv Motor drive until detect INNER-SW = LTrv - Reverse When press [TRV REV], Trv Motor drive until detect OUTER-SW = LLD-Motor -FW When press [LD-FWD] and hold, LD Motor turns CCW until button release.LD-Motor -Rev When press [LD-REV] and hold, LD Motor turns CCW until button release.RESET When press [RESET], the mechanism will go through the INITIALIZATION process.Retry Mode When press [Retry Mode]. The tray retry function will activatedAging Mode Aging Mode DescriptionLoading Cycle When press [Load Cycle], mechanism will be in continuos mode fortray open & close operation.Traverse Cycle When press [Trv Cycle], mechanism will be in continuos mode forOPU forward & reverse operation.Combine Cycle When press [Combi Cycle], mechanism will carry out full operation fromOPU at outer position - Tray fully opened & vice versa in continuos mode.** The above aging mode will stop when user press [RESET] or switch OFF power on this board.