Panasonic BL-C230A Installation Manual

Also see for BL-C230 Series: Comparison chart Setup guide Setup guide Operating instructions Specifications

Contents

Panasonic BL-C230A Installation Manual Manual pdf 1 page image

Installation GuideNetwork CameraModel No. BL-C230 (Wireless/Wired Type)Model number suffixes (“A”, “CE”, and “E”) are omitted from the following model numbers shown in this document, unless necessary.BL-C230A, BL-C230CE, BL-C230EPlease read the included Important Information before proceeding.Complete Operating Instructions and all other documentation can be found on the included CD-ROM.• This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place thecamera for regular use.• The Setup Guide describes how to set up the camera so that it can be accessed using a PC.• Refer to the Operating Instructions on the CD-ROM for details regarding the camera’s features.• Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or using the camera.Abbreviations• UPnP is the abbreviation for “Universal Plug and Play”.• The Network Camera is referred to as “the camera” in this document.• The Setup CD-ROM is referred to as “the CD-ROM” in this document.© Panasonic System Networks Co., Ltd. 2009PNQX2272ZA KK1009CQ0Please read this document before using the product, and save this document for futurereference. Panasonic Network Camera Website:http://panasonic.net/pcc/ipcam/Indoor Use OnlyInstallation Procedure OverviewThe following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.Preparation1. Confirm the following items are included in the camera’s packaging.2. You will need the following additional items to install and configure the camera.– a PC (see the system requirements in the Important Information document)– a LAN cable (CAT-5 straight cable)– a routerPreparationConfirm that you have all theitems required forinstallation.Camera DiagramMake sure you know thenames of the camera’sphysical features.ConnectionsConnecting the camera toyour network and to the poweroutlet.Setup• Refer to the included Setup Guide for informationon configuring the camera to be connectedwirelessly to the network, and to be accessedfrom a PC.• BL-C230A only: Refer to the included SetupGuide for VIERA Connection for information onregistering the camera to a Panasonic VIERA TV.MountingMounting or placing thecamera.Main Unit (1 pc.)The appearance of yourcamera depends on whichmodel you havepurchased.Screw A (1 pc.)Order No. XTB4+20AFJUsed when securing the safetywire to the wall.Washer S (2 pcs.)Order No. XWG35FJUsed when mounting the camera to thewall.AC Adaptor (1 pc.)Order No. PQLV206YCord Length: About 3 m(9 feet 10 inches)BL-C230AScrew B (1 pc.)Order No. XTB26+10GFJUsed for securing the safetywire to the camera.Washer M (1 pc.)Order No. XWG26D12VWUsed when securing the safety wire tothe camera.Order No. PQLV206CEYCord Length: About 3 m(9 feet 10 inches)BL-C230CEScrew C (2 pcs.)Order No. PQHE5004XUsed for wall mounting thecamera.Washer L (1 pc.)Order No. XWG4F16VWUsed when securing the safety wire tothe wall.Order No. PQLV206EYCord Length: About 3 m(9 feet 10 inches)BL-C230ESafety Wire (1 pc.)Order No. PQME10080ZUsed to secure the camerawhen wall mounting it.Important Information (1 pc.)Installation Guide(this document) (1 pc.)Setup Guide (1 pc.)Setup Guide (for VIERA Connection)(1pc.) [BL-C230A Only]Setup CD-ROM (1 pc.)Order No. PNQC1016SContains the Setup Program needed to configure the camera, as well as thecamera’s documentation.**See the included Important Information for a description of each document.BL-C230CEBL-C230EBL-C230ACamera Diagrams*1 See “PRIVACY Button” on page 4 for information about the PRIVACY button.*2 See 1.1 Understanding the Camera Indicators in the Troubleshooting Guide on the CD-ROM for indicator meaning.*3 BL-C230A onlyFront View Rear ViewABCDEFGHIPRIVACY button*1AntennaBuilt-in sensor (pyroelectric infrared sensor)Speaker (for built-in alarm)POWER indicator*2AV LINK indicator*3MicrophoneLens coverLensJKLMNOPQRSWall mounting holesTripod mounting holeSerial number and MAC address labelLAN portDC IN jackExternal I/O interfaceFACTORY DEFAULT RESET buttonSafety wire holeWIRELESS/WIRED switchCable coverDCEABFGHIJKLMNOPQRS

/ 4

Related manuals for Panasonic BL-C230 Series