Panasonic BL-C111A - Network Camera - Pan Operating Instructions Manual

Also see for BL C131A - Network Camera - Pan: Operating instructions Installation guide Setup guide Service manual Integration notes

Contents

Panasonic BL-C111A - Network Camera - Pan Operating Instructions Manual Manual pdf 81 page image

5 Changing Camera Settings5.1 Network SettingsThe camera’s network settings are made when configuring the camera according to the instructions providedin the Setup Guide. You can change these settings later if necessary using the procedures described in thissection.Note• You must log in to the camera as the administrator in order to change these settings.• After changing network settings and clicking [Save], the camera must be restarted. All buffered imagesare deleted when the camera is restarted.• Ask your Internet Service Provider or network administrator for the appropriate network settings.• If you cannot access the camera after changing certain network settings, use the Setup Program toconfirm the camera’s IP address (see Page 143) or reconfigure the camera as explained in the SetupGuide.• If your network uses the IPv6 protocol, see Page 130.Operating Instructions 815.1 Network Settings