Panasonic BB-HCM515A Setup Manual

Also see for BB-HCM515A: Operating instructions

Panasonic BB-HCM515A Setup Manual Manual pdf 1 page image

1. Insert the included CD-ROM into your PC.• The Setup Program starts. If the program does not start, double-click Setup.exe foundon the CD-ROM.2. Click [Search for Cameras].• The program searches for cameras connected to your network.If [Windows cannot open this file] is displayed after clicking [Manual][Select the program from a list]→[OK]→Check [Always use the selected program to open thiskind of file]→[Browse]→Browse to [C:\WINDOWS\system32\mshta.exe]→[Open]→[OK]3. When the Windows Security Alert is displayed, click[Unblock].• If the dialog is not displayed, continue to the next step.4. Select the camera you want to configure, and click[Access Camera].• If you have more than one camera, you can distinguish cameras by model number,printed on the front of the camera, or by MAC address (see “Camera Diagram” onpage 1 of the Installation Guide to find your camera’s MAC address label).• If more than 20 minutes have passed since the selected camera was turned on, youcannot configure the camera. Turn off the camera, then turn it on again. This restrictiondoes not apply to cameras which have not been configured yet or have been reset totheir factory default settings.• If you are using firewall or antivirus software on your PC, the Setup Program may notbe able to find any cameras on your network. If you cannot disable your firewall orantivirus software, you can configure the camera by entering its MAC address (see“Camera Diagram” on page 1 of the Installation Guide to find your camera’s MACaddress label).5. Enter the desired user name and password, then click[Save].• Do not forget the user name and password you set here, otherwise you will need toreset the camera and configure it again.6. Enter the user name and password, then click [OK].7. When [Setup completed] is displayed, click [To SingleCamera page].• If the following ActiveX ® Controls dialog is displayed, click [Install ActiveX Control...].• When the following Security Warning is displayed, click [Install].• The camera image is displayed.• [About this program]: Displays theprogram’s version information.• [Search for Cameras]: Displays a list ofcameras connected to your network.• [Manual]: Allows you to view the includeddocumentation. PDF versions of the printeddocumentation are included on the CD-ROM; Adobe® Reader ® is required to viewthem.• [Update Firmware]: Allows you to use theSetup Program to update the camera’sfirmware (built-in software).• [Save Settings to PC/Save Settings toCamera]: Allows you to save a backup ofall camera settings on your PC, or restoreall settings in the camera using a backupfile saved on your PC.• [Network Camera Recorder with ViewerSoftware Single Camera VersionInstallation]: Installs the [Network CameraRecorder with Viewer Software SingleCamera Version] software. (See “Installingthe Network Camera Recorder with ViewerSoftware Single Camera Version” onpage 2.)• [Exit]: Closes the screen and exits theSetup Program.To assign all network settings to the cameramanually, or to assign an IP address using theDHCP feature of your router, click [NetworkSettings], then select [Specify an IP Address] or[DHCP] and enter the appropriate settings.If you are using a French, German, Italian,Spanish, Russian, Simplified Chinese, orJapanese language OS, this screen will bedisplayed in the corresponding language,and all subsequent camera screens will bedisplayed in that language.The camera’s IP address is displayed. This is theIP address you must enter in your web browser toaccess the camera. Do not forget this address.This will install the viewer program (ActiveXControls) needed to display camera imagesproperly. Viewer programs must be installed toview MPEG-4 images, MJPEG images, and to useaudio features.Congratulations! You have successfully set up thecamera and can now view camera images.Before Reading this DocumentMake sure you have read the Important Information document andfollowed the instructions in the Installation Guide for connection yourcamera.• Before following the instructions in this document:– Confirm that your camera is turned on and connected to your router.– Temporarily disable any firewall or antivirus software on your PC.– Close your web browser.• Screen shots shown in this document are for reference only and may vary from what isdisplayed on your PC depending on the camera model, network settings, etc.Abbreviations• UPnP is the abbreviation for “Universal Plug and Play”.• The Network Camera is referred to as “the camera” in this document.• The Setup CD-ROM is referred to as “the CD-ROM” in this document.Setup GuideNetwork CameraModel No. BB-HCM515A (PoE Ready)© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.PQQX15703YA KK1106MH2107Please read this document before using the product, and save this document for futurereference. Panasonic Network Camera Website: http://www.panasonic.com/netcamfor customers in the USA and Puerto RicoIndoor Use Only

/ 2

Related manuals for Panasonic BB-HCM515A