This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Environment:Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.Routine care:Wipe this product with a soft cloth. Do not use benzine, thinner, or any abrasive powder.When you leave this product unused for a long period of time, disconnect the plug of the AC cord from the outlet.If you have any problems:Consult an authorized Panasonic Factory Service Center.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void theuser's authority to operate this device.No responsibility will be taken by our company with respect to consequences resulting from the use, damageor both of this product.Included ItemsThe following items are provided.Model No.: BB-HCA2AAC Adaptor . . . . . . . . . . 1Order No.: PQLV202Y1Cord Length: About 3 m(9 feet 10 inches)AC Cord . . . . . . . . . . . . . 1Order No.: PSJA1069ZCord Length: About 1.8 m(5 feet 11 inches)Installation Guide (This manual) . . . . . . . . . . . . . . . . . . 1SpecificationsAC adaptor Input 120 V AC, 60 HzOutput 12 V DC, 0.75 ATemperature Operation: 0 °C (+32° F) to +40 °C(+104° F)Storage: 0 °C (+32° F) to +50 °C(+122° F)Humidity Operation: 20 %–80 %(No Condensation)Storage: 20 %–90 %(No Condensation)Connecting this productConnect the AC adaptor cord to the DC IN jack, and plug the AC cord into the outlet.• When you operate the camera, the power outlet should be near the camera and easily accessible.• Only use this product with compatible cameras. For the compatible cameras, visit the Panasonic Network Camerasupport website at http://panasonic.co.jp/pcc/products/en/netwkcam/DC IN jackAC adaptorTo the outletAC cordAC adaptor cord* This camera is the BB-HCM403A.