Panasonic Aluminum Electrolytic Capacitors NHG Specification Sheet

Panasonic Aluminum Electrolytic Capacitors NHG Specification Sheet Manual pdf 1 page image

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately.Aluminum Electrolytic Capacitors/ NHGφ5 to φ8φD±0.5φd±0.05F±0.5Sleeve14 min. 3 min.L✽✽ L<16 : L±1.0L>20 : L±2.0Pressure reliefφ6.3< +–φ10<φD±0.5■ Features● Endurance : 105 °C 1000 h to 2000 h● RoHS directive compliantRadial Lead TypeSeries: NHG Type: A■ SpecificationsCategory Temp. Range –55 °C to +105 °C –25 °C to +105 °CRated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DCNominal Cap. Range 0.1 μF to 22000 μF 1.0 μF to 330 μFCapacitance Tolerance ±20 % (120 Hz/+20 °C)DC Leakage Current I < 0.01 CV or 3 (μA) After 2 minutes(Which is greater) I < 0.06 CV +10 (μA) After 2 minutestan δ Please see the attached standard products listEnduranceAfter following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sumof DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitorsare restored to 20 °C, the capacitors shall meet the limits specified below.Duration : 6.3 V.DC to 100 V.DC : (φ5 to φ8)=1000 hours, (φ10 to φ18)=2000 hours160 V.DC to 450 V.DC : 2000 hoursCapacitance change ±20 % of initial measured valuetan δ < 200 % of initial specified valueDC leakage current < initial specified valueShelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilizedat +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)■ Dimensions in mm (not to scale)W.V.(V.DC) Cap. (μF) Frequency (Hz)60 120 1 k 10 k 100 k6.3 to 1000.1 to 33 0.75 1.00 1.55 1.80 2.0047 to 470 0.80 1.00 1.35 1.50 1.501000 to 22000 0.85 1.00 1.10 1.15 1.15160 to 450 1 to 330 0.80 1.00 1.35 1.50 1.50■ Frequency correction factor for ripple current(mm)Body Dia. φD 5 6.3 8 10 12.5 16 18Lead Dia. φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5[mm]Apr. 2008

/ 5

Related manuals for Panasonic Aluminum Electrolytic Capacitors NHG