Panasonic AW-RP50N Operating Instructions Manual

Also see for AWRP50N - REMOTE CAMERA CONTROLLER: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic AW-RP50N Operating Instructions Manual Manual pdf 30 page image

30Setting the functions when the unit is linked with the switcher Switcher settingsA setting for controlling the switcher linked with the unit isavailable.It is established using the [SETUP] menu.Before taking the steps described here, the steps for“Switcher network settings” and “Setting the image outputand image input” must be taken.First, the basic menu operations will be described.1 Set the MENU button to ON.Press the MENU button to light its indicator.2 Set PRESET MEMORY/MENU 9 button (SETUP)to ON.When the button is pressed and its indicator is lighted,the [SETUP] menu is displayed on the LCD panel.[1]USER ▼3 Turn the F1 dial, display the SW LINK menu,and press the F1 dial.[2]SW LINK1.SWLINK ▼OffPress the F1 dial.4 Turn the F1 dial to select the menu item to beset.1.SWLINK ▼Off2.BUSCONTOffTurn the F1 dial.5 Turn the F2 dial, select the settings, and thenpress the F2 dial to change the setting.2.BUSCONTOff2.BUSCONTOnTurn the F2 dial, and then pressit.Bus switchingFrom the [SETUP] menu, select [SW LINK] and display[BUSCONT]. Then select On or Off.2.BUSCONTOnWhen “On” is selected as the item setting, the materialsset using the BUS item (described later) are sent from theremote camera to the switcher when the remote camerashas been selected using one of the unit’s CAMERASTATUS/SELECTION buttons.Control can also be exercised by assigning this setting to aUSER button.