Panasonic AW-RP501 Operating Instructions Manual

Also see for AWRP501 - HYBRID CONTROL PANEL: Operating instructions Service manual

Contents

Panasonic AW-RP501 Operating Instructions Manual Manual pdf 7 page image

-5-q Power Indicator [POWER]Lights red when POWER ON/OFF Switch w is in theON position, and goes out when the same switch is setto the OFF position.w Power Control Switch [POWER, ON/OFF]The camera and pan/tilt head are switched on whenthis switch is set to the ON position. (The power indica-tor lights.) The camera and pan/tilt head are partiallyswitched off when this switch is set to the OFF position.Note: When the switch is set to the OFF position, thecamera is totally switched off but the communica-tion line between the pan/tilt head and this controlpanel remains live. To disconnect all power sup-ply, pull out the power plug from the electrical out-let.e Operating Indicator [OPERATE]Lights green when communication begins normallybetween the camera and the control panel, and goesout if a communication error occurs.r Mode Selection Switch [MODE, BAR/CAM]Used to select camera color bar signals or cameravideo signals. With the switch set to BAR, the controlpanel outputs color bar signals from the video outputterminal. When the switch is set to CAM, it outputscamera video signals.t AGC Selection Switch [GAIN, AGC/MANU]Keep this switch in the AGC position if you want tokeep automatic gain control. When this switch is atAGC, GAIN H/M/L Switch y is invalid.y High Gain Selection Switch [GAIN, HIGH/MID/LOW]This switch is valid only when GAIN AGC/MANUSwitch t is in the MANU position. Normally, keep it inthe LOW position. When the camera is used in a darkplace or when video output level is not high enougheven if the iris is wide open, set the switch to the MIDor HIGH position.u Electronic Shutter Speed Selection Switch[SHUTTER, ELC/ 1/100 /OFF]Used to select a mode of camera electronic shuttercontrol. With the switch in the ELC position, the elec-tronic shutter is controlled and the camera sensitivity isautomatically adjusted when using the camera in abright place. The shutter speed is 1/100 second whenthe switch is in the 1/100 position. The electronic shut-ter is off when the switch is in the OFF position.i White Balance ATW Selection Switch[AUTO/ATW, ATW]When the switch is depressed, the camera keeps auto-matically adjusting white balance. The switch lightswhen it is selected.