Panasonic AW-RP501 Operating Instructions Manual

Also see for AWRP501 - HYBRID CONTROL PANEL: Operating instructions Service manual

Contents

Panasonic AW-RP501 Operating Instructions Manual Manual pdf 21 page image

-19-• Changing Switch Settings on Pan/tilt Headq Remove the cover from the pan/tilt head.* Be careful of the Tally Indicator wire.w Shift the mounting direction switches (SW1, SW2) onthe pan/tilt head depending on whether the head issuspended from the ceiling or mounted on the floor.They are originally set for suspended installation.* Do not shift SW3, which is originally set to If SW3 isshifted from the original position, no operations can becontrolled from the control panel.e Place the cover back on the pan/tilt head.* Be sure not to trap the wires.• If the pan/tilt head is connected to the control panelwith a cable longer than 300 meters, set the cablecompensation switch on the pan/tilt head to the ONposition in advance. If the distance between thepan/tilt head and the control panel is shorter than 300meters, keep the switch in the original position (OFF).For details on shifting the switch, refer to the figurebelow or the Operating Instructions for Pan/tilt Head.SW 2SW 1 SW 3SW 2SW 1DESKTOPHANGINGTally Indicator