Panasonic AVCCAM AG-HMC151E Operating Instructions Manual

Also see for AVCCAM AG-HMC151E: Service information Parts list

Contents

Panasonic AVCCAM AG-HMC151E Operating Instructions Manual Manual pdf 93 page image

Menu93AV OUT SETUP screenItem Displaymode Description of settingsHDMI OUT SEL (Camera)(PB)Sets the output video format of the HDMI OUT terminal.AUTO: Automatically determines the output resolution based on information ofconnected monitors.FIX: Fix the output at the recorded resolution.(Output in 1080 interlaced or 720 progressive mode)576P (When SYSTEM FREQ is se to 50 Hz):Output in 576 progressive mode.480P (When SYSTEM FREQ is se to 59.9 Hz):Output in 480 progressive mode.Simultaneous HDMI and component output is possible only in FIX mode.There will be no VIDEO OUT output when connected with an HDMI cable if thisitem is set to anything other than FIX.••CMPNT OUTSEL(Camera)(PB)Selects the type of component terminal.AUTO: Monitor with D4 terminal (720P/1080i output)1080i: Monitor with D3 terminal (1080i output)576i (When SYSTEM FREQ is se to 50 Hz):Monitor with D1 terminal (576i output)480i (When SYSTEM FREQ is se to 59.9 Hz):Monitor with D1 terminal (480i output)Cross-conversion is only performed when content recorded at 720P is output at1080i. Cross-conversion does not take place in other cases.•DOWNCONMODE(Camera)(PB)Switches down-conversion output mode.SIDE CROP: Crops the right and left edges of the image for a 4:3 aspect ratio.Images may extend beyond the boundaries of the screen and be partiallyunable to be seen when outputting from the VIDEO OUT terminal, or whenoutputting from the COMPONENT OUT terminal when the COMPNT OUT SELitem is set to 576i (or 480i when SYSTEM FREQ is set to 59.9 Hz).LETTER BOX:Adds black bands at the top and bottom of the image to display16:9 images on a 4:3 screen.SQUEEZE: Squeezes 16:9 images horizontally when displaying on a 4:3screen.•VIDEO SETUP(This item is notdisplayed onthe menu whenSYSTEM FREQis set to 50 Hz.)(Camera)(PB)Sets the setup level of video signals.0%: VIDEO OUT terminal output and recording setup levels will both be setto 0%.7.5% A: VIDEO OUT terminal output setup level will be set to 7.5%, whilerecording setup level will be set to 0%.AUDIO OUT (Camera)(PB)Sets the audio signals to output from the AUDIO OUT pin jack.CH1/CH2: CH1 terminal = CH1 signals, CH2 terminal = CH2 signalsCH1: CH1 terminal = CH1 signals, CH2 terminal = CH1 signalsCH2: CH1 terminal = CH2 signals, CH2 terminal = CH2 signalsWhen an SD Memory Card containing 5.1 channel content, recorded on otherequipment, is played back on the camera, it is down-mixed to 2 channels whenoutput through the AUDIO OUT or headphone terminal.•HP MODE (Camera) Selects the sound heard through the headphones.LIVE: The sound which has been input from the microphone is output asis. This setting is selected when delays in the sound are annoying.RECORDING: The sound in the status which is to be recorded (the soundsynchronized with the images) is output.indicates the factory setting.