|
21. Check the software versionCheck the software version of the AV-HS6000.1 Press the button on the left side of the MenuPanel to light it, and select the [MAINTENANCE] [Status] tab in the menu screen.pp The system version of the AV-HS6000 is displayed in the[System Version] field under the [System Version] column.2. Save project filesThe AV-HS6000 must be initialized after upgrading thesoftware version. Therefore, be sure to save the currentsetting data and memory contents before upgrading thesoftware version.1 Insert a memory card that has been initialized on theAV-HS6000 into the memory card slot.2 Press the button on the left side of the MenuPanel to light it, and select the [PROJECT] [SD/SSD] tab in the menu screen.3 Select [Save] in the [SD] column.The [Save] screen appears.Select the item you want to save.4 Select [OK].The project file is saved to the free space on the memorycard.pp It will take a few moments to save the project file. Do notperform the following until the process is complete.pp Eject the memory cardpp Turn off the AV-HS6000 Main Frame or ControlPanel3. Upgrade the Main FrameUpgrade the software version of the Main Frame.1 Extract the downloaded file.pp The following folder is created.HS\HS6000\UPDATE\The file (extension: .60d) in this folder is the versionupgrade file.2 Save the extracted folder to the memory card withoutchanging the directory structure.pp Save to a memory card initialized with the AV-HS6000.You can also use the memory card used in the “2. Saveproject files” procedure.3 Eject the memory card from the computer, and insertit into the memory card slot on the AV-HS6000.4 Press the button on the left side of the MenuPanel to light it, and select the [MAINTENANCE] [Status] tab in the menu screen.5 Select [Update File] in the [Update] column.Select the version upgrade file in the file selection screen.6 Select [OK] to start the upgrade process.A dialog box displaying a progress bar appears whenupgrade starts.pp Do not perform the following until the process is complete.pp Eject the memory cardpp Turn off the AV-HS6000 Main Frame or ControlPanelFirst, transfer the version upgrade data from the memorycard to the Main Frame.While data is being transferred, the PGM/A bus crosspointbuttons in the top ME row light in sequence from left toright.4SDIIN33SDIIN22SDIIN11Black121110SDIIN99SDIIN8SDIIN11SDIIN108SDIIN77SDIIN66SDIIN55SDIIN4pp It will take about 1 minutes to for the version upgradedata to transfer.When data transfer is complete, version upgrade of theMain Frame will start automatically.When version upgrade of the Main Frame starts, thePGM/A bus crosspoint buttons in the top ME row lighttemporarily in sequence from left to right.4SDIIN33SDIIN22SDIIN11Black121110SDIIN99SDIIN8SDIIN11SDIIN108SDIIN77SDIIN66SDIIN55SDIIN4pp It takes about 2 minutes to upgrade the softwareversion.The “Complete” dialog box appears when version upgradeof the Main Frame is complete.This completes upgrade of the Main Frame softwareversion.7 Close the “Complete.” dialog box, and turn off theMain Frame and Control Panel.
|
