Panasonic AV(FS-FS-T) Manual

Contents

Panasonic AV(FS-FS-T) Manual Manual pdf 7 page image

AV3,AVM3/AVT3,AVL3SPECIFICATIONS1.Contact ratingRemark: Time constant shall be less than 7 msec. for DC inductive loads.2.Characteristics3.Operating characteristics1) Pin plunger2) Short hinge leverVoltageStandard version Long life versionAgNi alloy contact typeGold-clad contacttype AgNi alloy contact typeGold-clad contacttypeTriple layer Triple layerResistive load(cosφ]1)Inductive load(cosφ]0.6-0.7)Resistive load(cosφ]1)Resistive load(cosφ]1)Inductive load(cosφ]0.6-0.7)Resistive load(cosφ]1)125V AC 3A 2A 0.1A 5A 3A 0.1A250V AC 3A 2A 0.1A 5A 3A 0.1A30V DC 3A 2A 0.1A 5A 3A 0.1A125V DC 0.4A 0.05A — 0.4A 0.05A —Standard version Long life versionAgNi alloy contact type Gold-clad contact type AgNi alloy contact type Gold-clad contact typeElectrical life at rated load (O.T.max.) 5 × 10 4 at 20 cpm 2 × 10 5 at 20 cpm 5 × 10 4 at 20 cpm 2 × 10 5 at 20 cpmMechanical life 5 × 10 5 at 60 cpm (O.T.max.) 3 × 10 7 (O.T.: Specified value)10 7 (O.T.max.) at 60 cpmInsulation resistance Min.100MΩ at 500V DCDielectric strengthBetween non-continuous terminalsBetween each terminal and otherexposed metal partsBetween each terminal and ground1,000 Vrms1,500 Vrms1,500 VrmsVibration resistance (Pin plunger type) 10 to 55 Hz at single amplitude of 1.5mm (Contact opening: max.1 msec.)Shock resistance (Pin plunger type)(Contact opening: less than 1 msec.)294 m/s 2 min.(O.F. 0.98 N)147 m/s 2 min.(O.F. 0.49 N)294 m/s 2 min.(O.F. 0.98 N)147 m/s 2 min.(O.F. 0.49 N)49 m/s 2 min.(O.F. 0.25 N)294 m/s 2 min.Contact resistance (Initial)50 mΩ max.(by voltage drop 1 A6 to 8V DC)100 mΩ max.(by voltage drop 0.1 A6 to 8V DC)Au: 50 mΩ max. (by voltage drop 0.1 A 6 to 8V DC)Ag: 50 mΩ max. (by voltage drop 1 A 6 to 8V DC)Allowable operating speed 0.1 to 1,000 mm/sec.Max.operating cycle rate 300 cpmAmbient temeprature –25°C to +85°C (no freezing below 0°C)Unit weight Approx.2g4th digitnumber ofPart No.O.F.max. R.F.min. P.T.max. M.D.max. O.T.max. O.P.0 0.25N 0.020N0.6mm 0.1mm 0.4mmDistance from mounting holes: 8.4±0.3mmDistance from stand-off:FS 11.8±0.4mmFS-T 11.7±0.4mm2 0.49N 0.074N4 0.98N 0.15N5 1.47N 0.20N4th digitnumber ofPart No.O.F.max. R.F.min. P.T.max. M.D.max. O.T.max. O.P.0 0.098N 0.004N2.5mm 0.5mm 0.8mmDistance from mounting holes: 8.8±0.8mmDistance from stand-off:FS 12.2±0.9mmFS-T 12.1±0.9mm2 0.20N 0.017N4 0.39N 0.034N5 0.59N 0.039NAll Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.