Panasonic AJ-SD755 Operating Instructions Manual

Panasonic AJ-SD755 Operating Instructions Manual Manual pdf 76 page image

76[GENERAL]indicates safety information.Power supply: AC 100 – 240 V, 50 – 60 HzPower consumption: 110 W (with all options)Operating ambient temperature:41°F to 104°F (5°C to 40°C)Operating ambient humidity:10% to 80% (no condensation)Weight:33.0 lb (15.0 kg)Dimensions (WaHaD):16 3/4a6 15 /16a16 15 /16 inch (424a175.2a430 mm)(Not including the support legs, connectors, and JOG dial)Recording format:DVCPRO/DV format selectableRecording video signal:525i systemRecording audio signal:48 kHz 16-bit 2 channelsRecording tracks:Digital video audio:helical trackThe time code is recorded in the sub-code area.Cue track:1 trackControl track:1 trackTape speed:33.820 mm/sec (DVCPRO)Recording time:184 minutes (using the AJ-5P92LP)66 minutes (using the AJ-P66MP)Tape:Metal tapeFF/REW time:Less than 3 min (with AJ-5P92LP)Less than 2 min (with AJ-P66MP)Digital slow:–0.43a to +0.43a, +0.5a, +0.75a speed(DVCPRO)Editing accuracy:±0 frames (using the time code)Tape timer accuracy:±1 frame (using the continuous CTL signal)Servo lock time:Less than 0.5 sec (color framing/standby ON)Specifications[VIDEO]$ Digital videoSampling frequencies:Y: 13.5 MHz, PB/PR: 3.375 MHzQuantizing:8 bitsVideo compression method:DV-Based compression (SMPTE 314M)Video compression rate:DVCPRO: 1/5Error correction:Reed-Solomon product codeBit rate:DVCPRO: 25 Mbps$ Digital IN (option)/Analog component OUTVideo bandwidth:Y : 30 Hz to 5.75 MHz (±0.5 dB)PB/PR : 30 Hz to 1.3 MHz (±0.5 dB), 1.5 MHz (–5.0 dB)S/N ratio:Better than 60 dB (Y)K factor:Less than 1% (Y 2T)$ Analog component IN/Analog component OUTVideo bandwidth:Y : 30 Hz to 5.5 MHz (±1.0 dB), 5.75 MHz (–2.0 dB)PB/PR : 30 Hz to 1.3 MHz (±1.0 dB), 1.5 MHz (–5.0 dB)S/N ratio:Better than 55 dBK factor:Less than 1% (Y 2T)Y/PB, PR delay:Less than 20 ns$ Analog composite IN/Analog composite OUTVideo bandwidth:Y : 30 Hz to 4.5 MHz (±1.0 dB), 5.5 MHz (–3.0 dB)Y/C delay:Less than 20 ns$ Video input connectorAnalog component input:BNCa3 (Y, PB, PR)Y: 1.0 V [p-p], PB/PR: 0.486/0.7 V [p-p] switchable,75Ω (75% color bar, 7.5% setup)Analog composite input:BNCa2, loop-through, 75Ω on/offVIDEO:1.0 V [p-p] (75Ω)Reference input:Analog composite, BNCa2, loop-through, 75Ω on/offSDI input (option):BNCa2, active through, complies with SMPTE 259M-CstandardSDTI input (option):BNCa1, complies with SMPTE 305M/321M standard

/ 78

Related manuals for Panasonic AJSD755 - DVC STUDIO VTR