Panasonic AJ-HD1700 Operating Instructions Manual

Also see for AJHD1700 - HD VTR W/24P: Menu information Operating instructions

Contents

Panasonic AJ-HD1700 Operating Instructions Manual Manual pdf 113 page image

113Display positionThe position of the characters superimposed on thedisplay can be changed using (C HPOS) and(C VPOS) on the menu and the ADJdial.F3F2Superimpose screenThe control signals, time code, etc. are displayed onthis screen using abbreviations.TCR 22 : 22 : 22 : 22TV monitorTCR 22 : 22 : 22 : 22TV monitorTCR 22 : 22 : 22 : 22TV monitorAbbreviationsCTL: Control signal count valueTCR: Time code data recorded in the SBC areaTCR.: Time code data recorded in the VAUX areaUBR: User’s bit data recorded in the SBC areaUBR.: User’s bit data recorded in the VAUX areaTCG: Time code data of the time code generatorUBG: User’s bit data of the time code generatorOperation modeThe VTR’s operation mode can also be displayedusing (DISPLY) on the menu.F4TCR 22 : 22 : 22 : 22STOPTV monitorVTR operation modeCharacters displayedThe background of the characters superimposed onthe display screen can be changed using (CTYPE) on the menu.F5TCR 22 : 22 : 22 : 22TV monitorTCR 22 : 22 : 22 : 22TV monitorWhen the 23/24 Hz mode has been selected as thesystem menu item No.25 (SYSTEM FREQ) setting,the time code and other information superimposed onthe MONITOR and VIDEO OUT3 connectors are notdisplayed.[T2R], [T2R.], [U2R] or [U2R.] is displayed when thedata has not been read correctly from the tape.