Panasonic AJ-DE97P Installation Manual

Also see for AJ-DE97P: Operating instructions

Panasonic AJ-DE97P Installation Manual Manual pdf 7 page image

– 7 –1-4. Connecting the peripheral devices and layout precautionsBear in mind the points listed below when connecting the computer monitor,monitor (Video) for monitoring the pictures and other peripheral devices tothe unit. It is recommended that you proceed while referring to the rear panelconnection diagrams in the Operating Instructions. (Refer to pages 13–16 ofOperating Instructions.)For details on the handling of peripheral devices, refer to the operatinginstructions accompanying each device concerned.) Connect the peripheral devices while power to the unit and peripheraldevices is off.) Before moving the unit, turn its power off.Do not move the unit while the power is still on.) Install the unit in a flat and stable location.) At the installation stage, ensure that the connectors and cablesprotruding from the unit’s rear panel do not make contact with anyobjects in the vicinity.) At the installation stage, do not drop the keyboard or mouse, andtake care not to run their cables underneath the unit or peripheraldevices.) Do not place objects on top of the unit.) Leave a sufficient clearance around the unit in order to improve theventilation inside the unit.) Do not place food or drinks in the vicinity of the unit.Morsels of food or spilled drinks can cause trouble.) Check that you have not forgotten to connect the VGA cable betweenthe unit and the monitor for the computer.) Check that you have not forgotten to connect the video cablebetween the unit and monitor (Video) for monitoring the pictures.) Check that you have not forgotten to connect the unit and any otherperipheral devices.) Check that all the devices required have been connected, and insertthe power plugs of the unit and peripheral devices into the poweroutlets.) When the SCSI hard disk drive for external expansion purposes is tobe connected:Attach one of the ferrite cores packed with the unit to one end of theSCSI I/F cable and the attach the other one to the other end.