Panasonic AG-YAGHG Operating Instructions Manual

Contents

Panasonic AG-YAGHG Operating Instructions Manual Manual pdf 6 page image

E-5ENGLISHNames and Functions of Components4 18 2 3 4 5 14141 11 81091812131216 157 196171 HDMI connection terminalConnects to the digital camera’s HDMIconnector.2 Electrical contacts3 Interface contacts4 Camera attachment pins5 Attachment screw6 Screw hole (1/4-20 UNC)Attaches to PL lens compatibility adapters,etc.7 HDMI terminalHDMI Type A output terminal.(VIERA Link is not supported.)yyUse a high-speed double-shielded4K-compatible HDMI cable (up to 2 m)that is marked with the HDMI logo whenconnecting to this terminal.8 DC IN terminalConnects to the DC power supply (battery:12 V DC).1 2 34Pin no. Signal1 GND2, 3 —4 12 VCASE Frame GNDNotes on DC power supply (battery)yyVerify that the output voltage matches theunit’s voltage rating before connection.yyUse a rated output current that is equalto or higher than the unit’s input currentrating.yyUse a shielded cable that is less than 2 min length for the DC cable connecting theunit to the DC power supply (battery).yyAn inrush current is generated when thedigital camera is turned on. An insufficientpower supply capacity when the power isturned on may result in malfunction. Werecommend using a DC power supply(battery) that can provide at least twice thepower consumption value of the unit.Verify the pin positions of the outputconnector of the DC power supply(battery) and the unit’s DC IN terminal,and be sure to connect with the correctpolarities.Connecting +12 V power to the GNDterminal may result in fire or malfunction.