Panasonic AG-MDR15P Operating Instructions Manual

Also see for POVCAM AG-MDR15: Quick reference guide Quick reference guide

Contents

88Setup menu list (continued)TC/UB SETUPThe content selected under [TC/UB SETUP] is set for each mode individually.Item Displaymode Description of settingsTC MODE(Not displayedwhen [SYSTEMFREQ] is set to[50Hz])SDI/CAM Selects the time code correction mode when the time code of the internal timecode generator is recorded.DF: Uses the drop frame mode.NDF: Uses the non-drop frame mode.• [TC MODE] is automatically set to [NDF] when the recording frame rate of therecording format is set to 24P. (Only when [SYSTEM FREQ] is set to [59.9Hz])TCG SDI/CAM Sets the operation mode in which the time code of the internal time codegenerator is advanced.FREE RUN: The time code is advanced regardless of the operation mode.A slight time error may occur when switching to PB mode if theframe rate is set to 24P. (Only when [SYSTEM FREQ] is set to[59.9Hz])REC RUN: The time code is advanced when shooting.• When [PREREC MODE] → [ON] in the [RECORDING SETUP] setup menu isselected, [FREE RUN] is set automatically.SDI REGEN SDI Selects the TC and UB values that are recorded.ON: Records the values in the S-LTC range of the HD-SDI input.OFF: Records the internal TC and UB.When [ON] is set, the following applies.• The [TC MODE], [TCG], [TC PRESET] and [UB PRESET] settings cannot bechanged.• When TC data has been received from the HD-SDI input signals, the black andwhite of the characters used to display TC or UB are reversed.• When the format does not match, when there is no input data or when the TCdata cannot otherwise be received, the internal TC (FREE RUN) and UB arerecorded.TC PRESET SDI/CAM Sets the initial value of the time code that is recorded.YES NO• Set the frame value to 0 or a multiple of 4 when the recording frame rate of therecording format is set to 24P. If any other value is set, the recorded time codewill be misaligned. (Only when [SYSTEM FREQ] is set to [59.9Hz])UB PRESET SDI/CAM Sets the user information.YES NOindicates the factory default setting.