Panasonic AG-HPD24PJ Operating Instructions Manual

Also see for AG-HPD24E: Operating instructions

Contents

Panasonic AG-HPD24PJ Operating Instructions Manual Manual pdf 35 page image

Basic Operation: Recording 35Basic Operation1 Hold the POWER button for one second toturn the unit on.In the menu, select the frequency, format andinput signal to be recorded, as necessary.(➝ “List of Compatible Input and OutputFormats” Vol. 2, page 78)2 Insert a P2 card.3 Press the REC and PLAY buttonssimultaneously.Recording begins on the P2 card in the slotwith its access lamp lit orange.◆ NOTE:• Recording is disabled when the thumbnailscreen is open. Close the thumbnail screenbefore starting to record.4 Press the STOP button to stop recording.• See the following for various recording details.(➝ “Recording Clips” Vol. 2, page 6,“Adjusting the recording volume” Vol. 2,page 6)1 Hold the POWER button for one second toturn the unit on.Set the system frequency in the menu asnecessary. (➝ “Setup Menu” - “SYSTEM”Vol. 2, page 71)2 Insert a P2 card.3 Press the PLAY button.Clips play back in the order they wererecorded on the card. Press the FF/REWbuttons to fast forward or fast rewind, andpress STILL/PAUSE to pause.See the following for other special playbackoperations. (➝ “Playing Back at VariableSpeed” Vol. 2, page 43)4 Press the STOP button to stop playback.Push the playback button to start playing theyellow-framed clip selected by the cursor buttons.On the thumbnail screen, clip playback can belimited and re-ordered by selecting clips orswitching display arrangement. (➝ “Playing BackClips” Vol. 2, page 38)• See the following for details on displaying thethumbnail screen, (➝ “Thumbnail ScreenDisplay” page 34).RecordingPlaybackPlayback from the Record/Playback Screen (ThumbnailScreen Off)Playback from the ThumbnailScreen