Panasonic AG-CPD15P Operating Instructions Manual

Also see for AG-CPD15P: Operating instructions

Contents

17Operation on the MemoryCard Video RecorderNotes:• Do not try to turn the key furtherthan the stop position, and do notmove it unnecessarily, to preventdamage to the key and lock.• To prevent damage, do not exertundue force on the open cover.P2 card Insertion and RemovalInserting a P2 card (2) Insert a P2 card into the P2card slot and push it in untilthe Eject button pops out.Do not push inthis direction.Eject buttonInsert the cardwith the P2 logofacing up.Do not touch to avoidthe risk of injury.(3) Fold the protruding Ejectbutton to the right.Note:After confirming that the Eject buttonis folded over to the right, close theP2 card slot cover. Otherwise theEject button will be damaged.Do not insert or remove a P2 card when another P2 card is being accessed(while the [BUSY] lamp is lit or blinking). Otherwise the P2 card may bedamaged or P2 card data may be corrupted.(1) Open the P2 card slot cover.Insert the key in the lock andturn it clockwise to [ ].Note:The [BUSY] lamp blinks for a fewseconds when the P2 card slotcover is opened. Make sure thatthe blinking has stopped beforeinserting a P2 card.Before use(Continued on the next page)