17AC Fan Motor 92 sq.×25t(ASEN9)RoHS Directive compatibility informationhttp://www.nais-e.com/DIMENSIONS (mm inch)92.582.5±0.33.6423.248±.0126-4.3 dia.6-.169 dia.3.525 +1–0.3.984 +.039–.01225 +1–0.3.984 +.039–.012.1383.5.1383.5.1383.5.138300 min11.811 min82.5±0.392.53.248±.0123.642AirflowAirflowLead wire type 2 terminals type(200V class)Earth tap M4RATING1. Lead wire type, Standard speed2. 2 terminals type, Standard speed*1: Designates maximum values, *2: Designates minimum values, *3: Designates average valuesNotes: 1. Values above without designations are averages.2. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan.Part number Rated voltage(V)Frequency(Hz)Input power,% (W)Rated current*1(mA)Locked current*3(mA)Rotationspeed*2 (r/min)Max. air flow*2(m3/min)Max. staticpressure*2 (Pa)Noise*3(dB(A))Operating voltagerange (V) (%)Weight(kg)ASEN90211 10050/60 13/10190/150 200/1702600/3100 0.80/0.98 43.1/60.8 34/39(39/44) ±10 0.3ASEN90212 115 170/130 180/160ASEN90214 200 100/80 110/100ASEN90216 230 90/70 100/80Part number Rated voltage(V)Frequency(Hz)Input power,% (W)Rated current*1(mA)Locked current*3(mA)Rotationspeed*2 (r/min)Max. air flow*2(m3/min)Max. staticpressure*2 (Pa)Noise*3(dB(A))Operating voltagerange (V) (%)Weight(kg)ASEN902519 10050/60 13/10190/150 200/1702600/3100 0.80/0.98 43.1/60.8 34/39(39/44) ±10 0.3ASEN902529 115 170/130 180/160ASEN902549 200 100/80 110/100ASEN902569 230 90/70 100/80+10−20+10−20NEWDATA (Airflow - Static pressureCharacteristic Curve)6040200 0.2 0.4 0.6 0.8 1.060 Hz50 HzAirflow (m 3/min)Static pressure (Pa)MATERIALS USEDFrame: aluminum alloy die-castingPropeller: plasticBearings: ball bearingsLead wires: UL3266 and AWG22Terminal: Equivalent to Faston #110Label: 100 V class...black base200 V class...red baseSPECIFICATIONSAmbient temperature –10°C to +60°C +14°F to +140°FAmbient humidity 15 to 85%RHStorage temperature –20°C to +70°C –4°F to +158°FBreakdown voltage 1,500 V AC for 1 min. (between charging section and frame)Insulation resistance Min. 100MΩ (at 500 V DC megger)(between charging section and frame)Insulation class UL:A class, CSA:B classVibrationresistanceFrequency 10 to 55HzDouble amplitude width 0.75mmApplied direction X, Y and Z directionsApplied time 10 min. in each directionProtection Impedance protectedMean life MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value whenrun continuously under 25°C 77°F and room humidity at the nominal voltage.)