Panasonic AAD03011 Instruction Manual

Contents

Do not install or operate an inverter that is damaged or with parts missing.Failure to do so could lead to injury.[Install the inverter vertically]䊶Areas subject to direct sunlight.䊶Areas subject to water or high levelsof humidity.䊶Areas with large amounts of oil mist,dust or fiber dust.䊶Areas where rain water, water dropsor oil drops may come in contact.䊶Areas where corrosive gases, explosivegases or flammable gases are present.䊶Installation onto flammable materials suchas wood, or near flammable materials.䊶Areas subject to vibration.Installing the inverter in any otherway decreases its heat dissipationeffect and results in malfunction.[Avoid installing the inverter inthe following locations]Vertical Horizontal Sideways[Make sure the ambient temperaturestays within the specifications]The ambient temperature surroundingthe inverter will increase when it isinstalled near a heating unit or housedinside a panel. This may reduce thelife of the inverter. If you want to housethe inverter inside a panel, give carefulconsideration to the cooling methodand panel size.Space around the inverter10cm or more10cm or more5cmor more5cmor moreInverter11NoteInstallation!Install the unit on a non-combustible material such as metal.Installing it on other material could lead to fire.Do not place the unit near flammable materials.Failure to do so could lead to fire.Do not hold the terminal cover during transportation.Failure to do so could cause the unit to drop and lead to injuries.Do not allow foreign matter such as metal swarf enter the unit.Entry of this type of matter could lead to fire.Mount the unit according to the instruction manual in a place wherethe weight can be withstood.Failure to do so could lead to dropping of the unit and to injuries.Tolerable ambient temperature:-10 㷄㩷to 50㷄(Ambient temperatures should be measuredat a point 5cm from the inverter.)