FZ-1Figure20CNSFigure21• Mechanism ReassemblyFigure 232-9(5)Disconnect the connector (CN 4) asshown in Figure 20.(6)Turn the CD-ROM Drive Unit upsidedown and remove four screws (2.6x 8 mm) as showninFigure 21.(7) Disconnect three connectors (CN5,CN 7, CN 8) as shown in Figure 21.(8)Gradually raise the PCB and thendisconnect two connectors (CN 3,CN 6) as shown in Figure 22.(9)Remove the PCB.(1) After removing the Tray, unhook twoHooks securing the Traverse Deck asshown in Figure 23.Figure24CN7Figure 25Figure26FigureZ12-10(2)Remove the Traverse Deck.(3)Turn the CD-ROM Drive UnitasshowninFigure 25.(4)Secure the PCB with four screws (2.6 x 8 mm) as shown in Figure 25.(5)Connect the connector (CN 7) asshown in Figure 25.(6)Turn over the CD-ROM Drive Unitagain.(7)Connect the connector (CN 4)asshown in Figure 26.(8) Connect the flat cable to CN 3 asshown in Figure 27.FZ-1
