Panasonic 2-LINE KX-TG9551 Series Operating Instructions Manual

Also see for 2-LINE KX-TG9551 Series: Quick guide

R You can program this setting using either thebase unit or one of the handsets.Storing unwanted callersYou can store up to 250 phone numbers in the callblock list.Important:R We recommend storing 10 digits (including anarea code). If only 7 digits are stored, allnumbers that have the same last 7 digits will beblocked.n From the caller list:Handset1 MCN CID2 MbN: Select the entry to be blocked.R To edit the number: MMENUN a MbN:“Edit” a MSELECTNPress MEDITN repeatedly until the phonenumber is shown in the 10-digit format. Andthen, press MSAVEN. Go to step 5.3 MMENUN4 MbN: “Save CID” a MSELECTN5 MbN: “Call block” a MSELECTN6 MbN: “Yes” a MSELECTN7 Edit the phone number if necessary (24 digitsmax.).8 MSAVEN a MOFFNBase unit1 MCIDN2 MbN: Select the entry to be blocked.R To edit the number, press MEDITNrepeatedly until the phone number is shownin the 10-digit format.3 MSAVEN4 MbN: “Call block” a MSELECTN5 MbN: “Yes” a MSELECTN6 Edit the phone number if necessary (24 digitsmax.).7 MSAVEN a MEXITNn By entering phone numbers:Handset1 MMENUN#2172 MMENUN a MbN: “Add” a MSELECTN3 Enter the phone number (24 digits max.).4 MSAVEN a MOFFNBase unit1 MMENUN#217 a MADDN2 Enter the phone number (24 digits max.).3 MSAVEN a MEXITNBlocking incoming calls without phone numberYou can reject a call when no phone number isprovided, such as a call just showing “Out ofarea”.Handset / Base unit1 MMENUN#2402 MbN: Select the desired setting. a MSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNNote:R When the unit receives a cellular call without aphone number, the call may not be rejected.Setting the first ring for the call block listHandset / Base unitIf you do not want the first ring from a number onthe call block list to sound, turn the first ring settingto “Off”. The default setting is “On”.1 MMENUN#1732 MbN: Select the desired setting. a MSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNViewing/editing/erasing call block numbersHandset1 MMENUN#2172 MbN: Select the desired entry.R To exit, press MOFFN.3 To edit a number:MEDITN a Edit the phone number. aMSAVEN a MOFFNTo erase a number:MERASEN a MbN: “Yes” a MSELECTN aMOFFNFor assistance, please visit http://shop.panasonic.com/support 45ProgrammingKX-TG954x_955x_OI(en)_0507_ver432.pdf 45 2018/05/07 14:00:44