Panasonic 10GBASE-SR SFP+ Installation Manual

PN59021-TH/PN59023-THPN59021-MY/PN59023-MYPN59021-ID/PN59023-IDPN59021-SG/PN59023-SGPN59021-NZ/PN59023-NZModel No.10GBASE-LR SFP+ Module (SFP+10GLR)10GBASE-SR SFP+ Module 10GBASE-LR SFP+ ModulePN59021 PN59023IEEE802.3ae10GBASE-SRIEEE802.3ae10GBASE-LRSFF-8472 (Diagnostic Monitoring Interface)850 nm 1310 nmDC 3.3 V0 to 50°C /20 to 80% RH (No dew condensation)10GBASE-SR SFP+ Module (SFP+10GSR)Installation Guide Thank you for purchasing our product. This document provides important information about safe and properoperations of this SFP+ Module. Please read the "Important Safety Instructions". Any problems or damages resulting from disassemblyof this SFP+ Module by customers are not covered bythe warranty. The instruction guide can be downloaded from thefollowing URL.https://panasonic.co.jp/ew/pewnw/english/datadownload/index.htmlC1214-20122 Printed in JapanProduct OutlineSpecificationsProduct nameModule No.StandardsCompatible cableOptical wavelengthOperating voltagePower consumptionOperating ambienttemperature/humidityFiber optic portconnector typeAccessoriesMMF cableLC connector (Duplex)SMF cable1.0 W max 1.25 W maxExternal dimensionsMass (Weight) 17 g9 mm (Height) x 14 mm (Width) x 57 mm (Depth)(Excluding protruding sections)Installation Guide (this document) x 1(*)Just the PN59021-TH/PN59023-TH has 1 Installation Guide inThai (at total of 2 guides)Protection cap of the fiber optic port (Attached to the module) x 110GBASE-SR SFP+ Module and 10GBASE-LR SFP+ Module are SFP (Small Form-FactorPluggable) modules to be connected to a Panasonic Ethernet Switch’s SFP+ extensionslot.MMF: Multi Mode Fiber SMF: Single Mode Fiber1. Securely connect the SFP+ Module to theSFP+ extension slot of a Panasonic EthernetSwitch.2. Remove the protective cap of the SFP+Module’s fiber optic port.3. Connect a fiber optic cable that meets thestandards specified for the SFP+ Module.4. Connect another SFP+ Module of the samemodel number on the opposite end.1. Unlatch the fiber optic cable and remove it from theSFP+ Module.2. Pull down the lever of the SFP+ Module 90 degrees asshown in the figure to unlatch the SFP+ Module.3. Pull out the SFP+ Module.InstallationRemovalSFP+ extension slotSFP+ ModuleFiber optic port Ethernet SwitchLever2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021©2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021©Panasonic Electric Works Networks Co.,Ltd.Panasonic Electric Works Networks Co.,Ltd. 2022

/ 2

Related manuals for Panasonic 10GBASE-LR SFP+