MP3 CD Player/ReceiverModel:Operating Instructions¡ Please read these instructions carefully before using this product and keep this manual for future reference.SpecificationsAccessoriesMounting Collar Trim Plate Power Connector Remote Control Unit(a battery included)Q’ty: 1 Q’ty: 1 Q’ty: 1 Q’ty: 1(FX0214C384ZB) (YFC054C079YA) (YAJ024C146CA) (YFX994C199CA)Lock Cancel Plate Mounting Bolt (5 mm ø) Rubber Bushing Operating InstructionsInstallation InstructionsInstallation kit Instruction kitQ’ty: 1 set Q’ty: 3 Q’ty: 1(ZZBISCP137U)(English: YFM264C321CA)(Français: YFM264C322CA)(Español: YFM264C323CA)(YFM294C211CA)Notes:¡ The number in parentheses underneath each accessory part name is the part number for maintenance and ser-vice.¡ Accessories and their part numbers are subject to modification without prior notice due to improvements.¡ Mounting Collar and Trim Plate are mounted on the main unit at shipment.GeneralPower supply: 12 V DC (11 V – 16 V) test voltage14.4 V, Negative groundCurrent consumption: Less than 2.2 A (CD mode,0.5 W x 4 channels)Maximum power output: 50 W x 4 channels (at 1 kHz), Vol-ume control maximumTone adjustment rangeBass: ± 12 dB (at 100 Hz)Treble: ± 12 dB (at 10 kHz)Speaker impedance: 4 – 8 ΩPre-amp output voltage: 2.0 V (CD mode, 1 kHz, 0 dB)Pre-amp output impedance:200 ΩDimensions (W x H x D): 178 mm x 50 mm x 158 mm{7” x 1 15/16” x 6 1/4” }Weight: 1.3 kg {2 lbs. 14 oz}Front AUX inputInput impedance: 10 kΩMaximum input level: 2.0 VConnector: 3.5 mm ø Stereo mini pinInput sensitivity: 200 mVrmsFM radioFrequency range: 87.9 MHz – 107.9 MHzUsable sensitivity: 11.0 dBf (75 Ω)50 dB quieting sensitivity: 15.2 dBf (75 Ω)Frequency response: 30 Hz – 15 kHz (±3 dB)Alternate channel selectivity:75 dBStereo separation: 35 dB (at 1 kHz)Image rejection ratio: 55 dBIF rejection ratio: 100 dBSignal/noise ratio: 62 dBAM radioFrequency range: 530 kHz – 1 710 kHzUsable sensitivity: 27 dB/μV (22 μV, S/N 20 dB)CD playerSampling frequency: 8 times oversamplingDA converter: 1 bit DAC SystemPick-up type: Astigma 3-beamLight source: Semiconductor laserWavelength: 790 nmFrequency response: 20 Hz – 20 kHz (±1 dB)Signal to noise ratio: 96 dBTotal harmonic distortion: 0.01 % (1 kHz)Wow and flutter: Below measurable limitsChannel separation: 75 dBAbove specifications comply with EIA standards.Notes:¡ Specifications and design are subject to modificationwithout notice due to improvements.¡ Some figures and illustrations in this manual may bedifferent from your product.YFM264C321CA PTW1213-0 Printed in ChinaPower Output:16 W RMS x 4 Channels at 4 Ω and ≤ 1%THD+NSignal to Noise Ratio:85 dBA (reference: 1 W into 4Ω)English1000-RI0160U