Contents - viewer software
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Monitor images on a PC
- About the "Live
- Monitor images from multiple cameras
- Monitor images on a cellular phone/mobile terminal
- Monitor images on a mobile terminal
- Action at an alarm occurrence
- Transmit images onto an FTP server
- SF332, SW316L, SW316, SP306, SP305, SP302, SW155, SW152, NP502
- About the playback
- Download the images (When "H.264" is selected for "Recording format" of the SD memory card)
- About the network security
- Display the setup menu from a PC
- How to operate the setup menu
- About the setup menu window
- Configure the basic settings of the camera [Basic]
- sd memory card
- file name
- image quality
- How the logs and images are saved depending on the settings for "Alarm
- How the logs and images are saved depending on the settings for "Manual Schedule
- How the logs and images are saved depending on the settings for "FTP error
- Configure the settings relating to the picture (camera) mode [JPEG/H.264] (NP502 NW502S)
- Configure the settings relating to JPEG images [JPEG/H.264] (or [JPEG MPEG-4])
- Configure the settings relating to image adjust, zoom, extra optical zoom, extra zoom focus, back focus, privacy zone and VIQS [Image quality]
- Configure the settings relating to image quality ("Image adjust" setup menu) (SW355 SW352, SW316L, SW316, SW314, SW155, SW152)
- white balance
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF346 SF342, SF336, SF335, SF332, SP306, SP305, SP302)
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF135 SF132, SP105, SP102)
- Configure the settings relating to image quality ("Image adjust" setup menu) (NP502 NW502S)
- Set mask areas
- Configure the focus setting (Focus setup menu) (SW355, SW352, SF346, SF336 SP306)
- Adjust the zoom and focus (SW316L, SW316)
- auto focus
- Back focus setting (Back focus setup menu) (NP502, NW502S)
- Adjust the angular field of view using the extra optical zoom function (SW355, SW352 SF335, SW314, SP305)
- Adjust the angular field of view using the extra zoom function (SW155, SW152, SF135 SP105)
- Configure the settings relating to the privacy zone (Privacy zone setup menu)
- Configure the VIQS setting
- Configure the VIQS area
- Configure the settings relating to audio [Audio] (SW355, SW352, SF346, SF342, SF336 SF335, SF332, SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Configure the multi-screen settings [Multi-screen]
- Configure the settings relating to the alarm action [Alarm]
- Configure the settings relating to the alarm image [Alarm]
- Change the AUX name [Alarm] (SW355, SW352, SF346, SF342, SF336, SF335, SF332 SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Set the VMD areas [VMD area]
- Configuration of the settings relating to the E-mail notification [Notification]
- Configure the settings relating to Panasonic alarm protocol [Notification]
- Configure the settings relating to the XML notification [XML notification]
- Configuration of the settings relating to the face detection [Face detection]
- face detection
- Configure the settings relating to the authentication [User mng.]
- Configure the settings relating to the host authentication [Host auth.]
- Configure the settings relating to the priority stream [System]
- Configure the settings of the servers [Server]
- Configure the settings relating to the FTP server [FTP]
- Configure the settings relating to the NTP server [NTP]
- time zone
- Configuring the network settings [Network]
- network settings
- http port
- Configure the HTTPS settings (SW355, SW352, SW316L, SW316, SW314, SW155 SW152, SF135, SF132)
- Generation of the CRT key (SSL encryption key)
- Generation of the self-signed certificate (security certificate)
- Generation of CSR (Certificate Signing Request)
- Installation of the server certificate
- Configuration of the connection protocol
- Install the security certificate
- Configure the settings relating to DDNS [DDNS]
- Configuration of the DDNS service (Example of the "Viewnetcam.com" service)
- When using the "Viewnetcam.com" service
- Procedure to register information for the "Viewnetcam.com" service
- Checking the information registered for the "Viewnetcam.com" service
- When using "Dynamic DNS Update(DHCP)
- Configure the settings relating to the FTP periodic image transmission [FTP img trans.]
- trans.]
- How to set the schedules
- How to delete the set schedule
- Configure the settings relating to the schedules [Schedule]
- Maintenance of the camera [Maintenance]
- Upgrade the firmware [Upgrade]
- Check the status [Status]
- Reset the settings/Reboot the camera [Default reset]
- Using the CD-ROM
- Installing Panasonic "IP Setting Software
- Installing the manuals
- Configure the network settings of the camera using the Panasonic "IP Setting Software
- About the displayed system log
- Troubleshooting
|
• Available number of characters: 0 - 20 characters• Unavailable characters: " &• Default: Varies as follows depending on the model in use.–SW355 : WV-SW355–SW352 : WV-SW352–SF346 : WV-SF346, WV-SF336–SF342 : WV-SF342, WV-SF332–SF335 : WV-SF335–SW316L : WV-SW316L–SW316 : WV-SW316–SW314 : WV-SW314–SP306 : WV-SP306–SP305 : WV-SP305–SP302 : WV-SP302–SW155 : WV-SW155–SW152 : WV-SW152–SF135 : WV-SF135–SF132 : WV-SF132–SP105 : WV-SP105–SP102 : WV-SP102–NP502 : WV-NP502, WV-NW502S[Date/time]Enter the current time and date. When “12h” is selected for “Time display format”, “AM” or “PM” can be selected.• Available range: 01/01/2010 00:00:00 - 31/12/2035 23:59:59IMPORTANT• Use an NTP server when the more accurate time & date setting is required for the system operation.(®page 161)[Time display format]Select the time display format from “24h”, “12h” and “Off”. Enter the current hour reflecting this setting whenentering the current time and date for “Date/time”. To hide time and date, select “Off”.• Default: 24h[Date/time display format]Select a date/time display format. When “2010/04/01 13:10:00” is set for “Date/time” after selecting “24h” for“Date/time display format”, time & date will be respectively displayed as follows.• DD/MM/YYYY: 01/04/2010 13:10:00• MM/DD/YYYY: 04/01/2010 13:10:00• DD/Mmm/YYYY: 01/Apr/2010 13:10:00• YYYY/MM/DD: 2010/04/01 13:10:00• Mmm/DD/YYYY: Apr/01/2010 13:10:00• Default:– DD/MM/YYYY (E model)– Mmm/DD/YYYY (P model)[Summer time (daylight saving)]Select “In”, “Out” or “Auto” to determine whether or not to apply daylight saving time. Configure this setting ifthe summer time (daylight saving time) is applied in the location where the camera is in use.• In: Applies summer time. An asterisk (*) will be displayed on the left side of the displayed time and date.Operating Instructions 4910 Configure the basic settings of the camera [Basic]
|
