Contents - viewer software
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Monitor images on a PC
- About the "Live
- Monitor images from multiple cameras
- Monitor images on a cellular phone/mobile terminal
- Monitor images on a mobile terminal
- Action at an alarm occurrence
- Transmit images onto an FTP server
- SF332, SW316L, SW316, SP306, SP305, SP302, SW155, SW152, NP502
- About the playback
- Download the images (When "H.264" is selected for "Recording format" of the SD memory card)
- About the network security
- Display the setup menu from a PC
- How to operate the setup menu
- About the setup menu window
- Configure the basic settings of the camera [Basic]
- sd memory card
- file name
- image quality
- How the logs and images are saved depending on the settings for "Alarm
- How the logs and images are saved depending on the settings for "Manual Schedule
- How the logs and images are saved depending on the settings for "FTP error
- Configure the settings relating to the picture (camera) mode [JPEG/H.264] (NP502 NW502S)
- Configure the settings relating to JPEG images [JPEG/H.264] (or [JPEG MPEG-4])
- Configure the settings relating to image adjust, zoom, extra optical zoom, extra zoom focus, back focus, privacy zone and VIQS [Image quality]
- Configure the settings relating to image quality ("Image adjust" setup menu) (SW355 SW352, SW316L, SW316, SW314, SW155, SW152)
- white balance
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF346 SF342, SF336, SF335, SF332, SP306, SP305, SP302)
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF135 SF132, SP105, SP102)
- Configure the settings relating to image quality ("Image adjust" setup menu) (NP502 NW502S)
- Set mask areas
- Configure the focus setting (Focus setup menu) (SW355, SW352, SF346, SF336 SP306)
- Adjust the zoom and focus (SW316L, SW316)
- auto focus
- Back focus setting (Back focus setup menu) (NP502, NW502S)
- Adjust the angular field of view using the extra optical zoom function (SW355, SW352 SF335, SW314, SP305)
- Adjust the angular field of view using the extra zoom function (SW155, SW152, SF135 SP105)
- Configure the settings relating to the privacy zone (Privacy zone setup menu)
- Configure the VIQS setting
- Configure the VIQS area
- Configure the settings relating to audio [Audio] (SW355, SW352, SF346, SF342, SF336 SF335, SF332, SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Configure the multi-screen settings [Multi-screen]
- Configure the settings relating to the alarm action [Alarm]
- Configure the settings relating to the alarm image [Alarm]
- Change the AUX name [Alarm] (SW355, SW352, SF346, SF342, SF336, SF335, SF332 SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Set the VMD areas [VMD area]
- Configuration of the settings relating to the E-mail notification [Notification]
- Configure the settings relating to Panasonic alarm protocol [Notification]
- Configure the settings relating to the XML notification [XML notification]
- Configuration of the settings relating to the face detection [Face detection]
- face detection
- Configure the settings relating to the authentication [User mng.]
- Configure the settings relating to the host authentication [Host auth.]
- Configure the settings relating to the priority stream [System]
- Configure the settings of the servers [Server]
- Configure the settings relating to the FTP server [FTP]
- Configure the settings relating to the NTP server [NTP]
- time zone
- Configuring the network settings [Network]
- network settings
- http port
- Configure the HTTPS settings (SW355, SW352, SW316L, SW316, SW314, SW155 SW152, SF135, SF132)
- Generation of the CRT key (SSL encryption key)
- Generation of the self-signed certificate (security certificate)
- Generation of CSR (Certificate Signing Request)
- Installation of the server certificate
- Configuration of the connection protocol
- Install the security certificate
- Configure the settings relating to DDNS [DDNS]
- Configuration of the DDNS service (Example of the "Viewnetcam.com" service)
- When using the "Viewnetcam.com" service
- Procedure to register information for the "Viewnetcam.com" service
- Checking the information registered for the "Viewnetcam.com" service
- When using "Dynamic DNS Update(DHCP)
- Configure the settings relating to the FTP periodic image transmission [FTP img trans.]
- trans.]
- How to set the schedules
- How to delete the set schedule
- Configure the settings relating to the schedules [Schedule]
- Maintenance of the camera [Maintenance]
- Upgrade the firmware [Upgrade]
- Check the status [Status]
- Reset the settings/Reboot the camera [Default reset]
- Using the CD-ROM
- Installing Panasonic "IP Setting Software
- Installing the manuals
- Configure the network settings of the camera using the Panasonic "IP Setting Software
- About the displayed system log
- Troubleshooting
|
• For other devices such as network disk recorders, unless otherwise stated, Digest authentication isnot supported. (As of June, 2012)[User name]Enter a user name.• Available number of characters: 1 - 32 characters• Unavailable characters: " & : ; \[Password] [Retype password]Enter a password.• Available number of characters: 4 - 32 characters• Unavailable characters: " &Note• When the user name already in use is entered and the [Set] button is clicked, the respective userinformation will be overwritten.[Access level]Select the access level of the user from the following.• 1. Administrator: Allowed all available operations of the camera.• 2. Camera control: Allowed to display images from the camera and to control the camera. The camerasetting configuration is unavailable.• 3. Live only: Only displaying live images is available. The camera setting configuration and camera controlare unavailable.• Default: 3. Live only[User check]From the pull-down menu of “User check”, the registered user can be selected and the selected user’sinformation can be checked.The registered user will be displayed with the access level.(Example: admin [1])To delete the registered user, click the [Delete] button after selecting the user to be deleted.15.2 Configure the settings relating to the hostauthentication [Host auth.]Click the [Host auth.] tab on the “User mng.” page. (®page 42, page 44)154 Operating Instructions15 Configure the settings relating to the authentication [User mng.]
|
