OHAUS Ranger 7000 R71MHD3 Instruction Manual

Also see for ranger 7000: Instruction manual Quick start guide Instruction manual Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 R71MHD3 Instruction Manual Manual pdf 20 page image

EN-18 RANGER®7000 SCALESIn the Application Mode menu enter the Counting sub-menu.The Counting sub-menu is now displayed.Select the list item and press the button corresponding to theicon to change the setting as desired.4.3 CheckCheck is used to compare the weight or pieces of a sample against target limits.Press the button until Check is displayed in the upper left portion of the home screen.Two different modes can be selected: Weight and Pieces.Three different methods to enter the check limits: Over and Under, Nominal Weight Tolerance, or NominalPercent Tolerance.Setup check limits according to section 4.3.1 or 4.3.2. Place object on the pan to check if the weight is within thelimits.4.3.1 Check Weighing (default)Make sure that the check mode is set to check weighing in the configuration menu .Place objects on the pan. The Under/Accept/Over status is shown in the progress bar area while the actual weightof the item is shown on the main Display Line.The CHECK Home screenMain Display LineReference FieldsFunctions Application IconNote: Refer section 9.5, or press the button for button icon explanation.