OHAUS FD Series Instruction Manual

Also see for FD Series: Service manual User guide Quick start guide

OHAUS FD Series Instruction Manual Manual pdf 20 page image

FD Series EN-163.7.3 Readout sub-menuPress YesYesYesYesYes to enter the Readout sub-menu.ResetPress Yes to enter the Reset menu.• No - does not change the Readout sub-menu settings.• Yes - reset the Readout sub-menu to the factorydefault settings (bold and underlined text herein).Averaging LevelPress Yes to enter the Averaging Level menu.• Lo - less filtering (faster stabilization time).• Hi - more filtering (longer stabilization time).LightPress Yes to enter the Backlight menu.• Off - turn display backlight off.• On - turn display backlight on.• Auto - automatically turns the display backlight on whenthe scale is active and off after 5 seconds of inactivity.Auto OffPress Yes to enter the Auto-off menu.• Off - disable auto off.• On - turn the scale off after 5 minutes of inactivity.Auto Zero trackingPress Yes to enter the Auto Zero Tracking menu.• 0.5 d - 1/2 division capture range.• 1 d - 1 division capture range.• 3 d - 3 division capture range.• Off - disable Auto Zero Tracking.Auto TarePress Yes to enter the Automatic Tare menu.• Off - disable Automatic Tare.• On - enable Automatic Tare.End• Press Yes to leave this sub-menu and go to the next.• Press No to return to the top menu item in this sub-menu.