OHAUS EC Series Instruction Manual

Also see for EC Series: Instruction manual Service manual

Contents

OHAUS EC Series Instruction Manual Manual pdf 13 page image

EC Series EN-94.7 Storing Piece Weight into MemoryThere are 10 memory locations (0 to 9 numeric keys) available to store APW values.After determining the piece weight(refer toSec. 4.5 or 4.6), long-pressAPW for approx. 2 seconds. “StorE”will flash on the display.Press any one of the numeric keysto store the piece weight data in thisselected location.0.0.0.0.Weight g0.0.SSSSStttttorEorEorEorEorE40.0.Piece Weight g/pc40..0..0..Count pcs0..Press the numeric key (ex. location 5)with the stored piece weight data (ex.40 g/pc), then press APW two times.The stored data will be uploaded anddisplayed.4.8 Recalling Piece Weight from MemoryPlace the item to be weighed/countedon the pan (ex. 300g with APW of60g). Press M+. “Add”, then theaccumulation event is displayedmomentarily before reverting to nor-mal weighing mode.NOTE: Weight display must return tozero before the next accumulationcan register.NOTE: Accumulation data is not retained when the unit is turned off.NOTE: Stored APW values are retained when the unit is turned off.4.9 Accumulation: Weight and QuantityAccumulation is indicated by the annunciator.0.0.Weight g0.0.5..Memory LocationPiece Weight g/pc0..0.0.0.0.0..Count pcs0..0.0. 40.000 0..To recall Total Accumulation data,press M+ with no weight on the pan.The data is displayed momentarilybefore reverting to normal weighingmode.To clear the Total Accumulation data,press C while the data is displayed.------.Weight g300.0.AddPiece Weight g/pc60.0000------.Count pcs5..Total AccumulationTimes300.0. 60.000. 5..Total AccumulatedCountTotal AccumulatedWeight300.0. =01= 5..1500.0. 60.000. 25..Weight g1500.0. Total AccumulationTimesPiece Weight g/pc=05=Count pcs25..Total AccumulatedCountTotal AccumulatedWeight3 EC-textEN.pmd 8/9/2005, 1:41 PM9