NuAire FLAT2000 L Installation Manual

NuAire FLAT2000 L Installation Manual Manual pdf 1 page image

116. 10. 20. Document Number 670901Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.ukFLAT2000 L/RPositive Input Ventilation UnitInstallation ManualEMC Directive2014/30/EULVD Directive2014/35/EU1.0 SAFETY INFORMATION• The provision of the electrical supply and the connection of the unit to the electrical supplymust be carried out by a qualified electrician in accordance with latest edition of the wiringregulations.• Isolate from power supply before removing any covers. During installation / maintenance ensureall covers are fitted before switching on the mains supply.• All-pole disconnection from the mains as shown in the wiring diagram must be incorporatedwithin the fixed wiring and shall have a minimum contact separation of 3mm in accordance withlatest edition of the wiring regulations.• This unit must be earthed.• Ducting must be securely fixed with screws to the spigot to prevent access to live parts. Ductruns terminating close to the fan must be adequately protected by suitable guards.• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent orsimilarly qualified persons in order to avoid a hazard. The replacement cord must be of the sametechnical specification as the original cord or greater.• Precautions must be taken to avoid the back-flow of gases into the room from the open flue ofgas or other fuel-burning appliances.• This appliance should not be used by children or persons with reduced physical, sensory ormental capabilities or lack of experience and knowledge, unless they have been given supervisionor instruction concerning the safe use of the appliance by a person responsible for their safety.Children shall not play with the appliance. Cleaning and user maintenance shall not be carriedout by children.1.1 Hazard SymbolsGENERAL WARNINGSignifies a general warning regarding hazard specified by supplementary information.ELECTRIC SHOCKThis unit must be completely electrically isolated before any panels are removed. Checkmains supply and control connections.ROTATING PARTSThis unit contains fast moving rotational parts which may start automatically. It is thesole responsibility of the installer to adequately guard these components.REFER TO INSTRUCTION MANUALRead and understand the installation and maintenance manual before installing,operating or maintaining this product.