7TROUBLESHOOTINGFaultUnit is vibrating/wobbling.Reduced spray or no spray.Spin plates are not turning or are wobbling.Cause1. Mop pads are not aligned with base.1. Reservoir may be empty.2. System isn’t completely primed.3. Not holding trigger to spray solution.4. Spray tips on base clogged.1. Mop pads are not installed properly.2. Machine is standing upright.Treatment1. Realign mop pads on the base.1. Refill reservoir.2. Hold trigger for 10 to 15 seconds to makesure the solution has flowed to the spray tips.3. Hold trigger continuously while using themachine.4. Turn power OFF. Use a pin to clean thespray tip located at the front and center of themachine.1. Turn power OFF. Unplug machine and followinstructions on page 4 for replacing mop pads.2. Recline machine.