Menu
Navitar 12X Zoom Instruction Manual
Also see for 12X Zoom: BrochureBrochureInstructions for useInstructions for use
                       | |
Contents
| 
Navitar Motorized Zoom Systems Instruction Manual for WindowsRevision B Page 20 of 23 2/17/2004upon sensing a downward motion command and then approach the desiredpreset. The Autorun operation is halted by clearing the Autorun checkboxes or byclicking the STOP button, which will stop the motors and clear all Autorun checkboxes automatically.19.3 Preset Save ButtonThe Way Point Save button is used to load the current motor step position countvalue into the preset window. The user positions the motor at some desiredlocation, most likely using the Jog buttons and by pressing the Save button, theposition value is automatically loaded into the preset window.20 Dwell Time Entry WindowThe Dwell Time entry window is used to set the time the system pauses at eachof the selected presets during the Autorun operation. The value entered is inseconds. If the value is 0 during the Autorun operation, as soon as one preset isreached, the motor will immediately continue onto the next position. The dwelltime setting is common to all presets. |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved