Menu
Navig8r Navwatch-S10 User Manual
                                 | |
Contents
| 
USER MANUAL NAVWATCH-S108 | P a g eSETTING UP THE DATE AND TIMEFollowing from the Time Zone setting, you now have two clocks that need to be set.These are again, called T1 (day name) and T2.Note 1: If your global location does not support time auto-update you may be requiredto manually set the time.GPS updating1. Move outside to a location with clear line of sight to the sky. It is preferable tobe away from any surrounding buildings or structures that may inhibit the GPSsignal.2. From the time screen, press and hold the REC button untilthe date read out (not the time read out) disappears andis replaced with 00 (two zeros). The screen will display theletters GET. The device has now started searching for GPSsatellite signals.3. As contact is made with each satellite this number 00 willstart to increase, to as much as 10-15 depending on yourarea and conditions. Once the device has confirmed yourlocation co-ordinates, they will be momentarily displayedon the screen.4. Your current location date and time will now be updated to your watch.Note 1: You can re-view your location co-ordinates by pressing the REC button (twice)from the time screen. The first press will take you past a screen titled GET which showsthe last time and date your co-ordinates were updated. You can then press the MODEbutton again to take you back to the time screen.)Note 2: It is suggested that you remain still while this initial GPS satellite connection ismade. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved