Navien NPE-180A Installation Manual

Also see for NPE-180A: Installation manual Installation & operation manual Specification sheet Service manual Operation manual

Navien NPE-180A Installation Manual Manual pdf 1 page image

WARNINGIf the information in these instructions is not followed exactly, a fire or explosion may result, causingproperty damage, personal injury or death.Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any otherappliance.What to do if you smell gas Do not try to light any appliance. Do not touch any electrical switch; do not use any phone in your building. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. If you cannot reach your gas supplier, call the fire department.Installation and service must be performed by a qualified installer, service agency or the gas supplier.The installation must conform with local codes or, in the absence of local codes, the National Fuel Gas Code,ANSIZ223.1/NFPA 54 and/or CSA B149.1, Natural Gas and Propane Installation Code.When applicable, the installation must conform with the Manufactured Home Construction and SafetyStandard, Title 24 CFR, Part 3280 and/or CAN/CSA Z240 MH Series, Mobile Homes.* Lead FreeKeep this manual near this water heater for future referencewhenever maintenance or service is required.* The wetted surface of this product contacted by consumable water containsless than one quarter of one percent (0.25%) of lead by weight.Installation ManualNPE Condensing Water HeatersModel NPE-180ANPE-210ANPE-240ANPE-150SNPE-180SNPE-210SNPE-240S