Nav TV BMW56-CAN Manual

Nav TV BMW56-CAN Manual Manual pdf 1 page image

BMW56-CAN 12-31-2008Rev 1.0 Mark Ryan1 | P a g eBMW56-CANAdds Backup Camera and Video integration and AV Source switching for all iDrive equipped BMW 3 and 5series and new X5, X6, and X1(new) vehicles.What’s in the box Package Contents1. ce ModuleVideo InterfaCAN InterfaVideo InterfaCAN InterfaRCA AdapSwitch and Harne2. ce Module3. ce Harness4. ce Harness5. ter Harness6. LVDS Harness7. ssRadio Removal Radio Dash Images1. Remove (2) Torx T10 screws at the top of thescreen unit as shown circled in the accompanyingphoto.2. Once the screws are removed, there will be a gapbetween the top of the screen unit and thedashboard. Push a small plastic pry tool or a smallscrewdriver gently into this gap and the fasciashould come out of its mounting with virtually noforce.3. Place a soft covering over the face of the screenand turn it over.4. Remove the (2) harnesses from the back of thescreen as shown circled in the accompanyingphoto. The harness with the plastic connector is thePower and CAN harness and the one with themetal connector is the LVDS (video) harness.100 NW 11TH Street, Boca Raton, FL 33432Tel. 561-955-9770 Fax. 561-955-9760www.nav-tv.com info@nav-tv.com

/ 2

Related manuals for Nav TV BMW56-CAN