Menu
Nauticam Macro to Wideangle Lens 1 Instruction Manual
  |
Current as of 2018-10-19Instruction Manual forMarco to Wideangle Lens 1 (MWL-1)150 deg. FOV with Full Frame 60mm MarcoLensesPN# 86201FOREWORDThank you for your purchase of a NAUTICAM product.At NAUTICAM, we pride ourselves in the ability to recognize therequirements of professional as well as amateur underwater photographersand fulfill them through the innovative designs of our products. We strive toachieve a high level of user-friendliness by allowing stress-free installation andeasy operation of all important functions of the camera.Each product is individually inspected and water pressure tested toensure optimum quality.Please read this manual carefully before using the product, this willmaximize its performance as well as its lifetime.WARRANTYAll NAUTICAM Housing Products and Viewfinders are warranted againstany material and manufacturing defects for two years from the date ofpurchase for consumer use. NAUTICAM Optical Accessories are warrantedagainst material and manufacturing defects for a period of one year, andHDMI cables carry a four month warranty.This warranty only applies to products purchased from authorizedNAUTICAM dealers and does not extend beyond the original retail purchaser.To return your product for service, please contact your regionalauthorized service center(s). Please note that this warranty only applieswhen the product is purchased in the territory where the service center islocated.NAUTICAM does not hold responsibility for damage, of any nature, to anyequipment used with and/or placed within our products.NAUTICAM accepts no liability for any loss of captured images or theinability to capture images even if it is due to the malfunctioning of ourproducts.Unauthorized modifications and/or repairs of our products willautomatically invalidate the warranty.PACKAGE CONTENTS Marco Wideangle Lens 1 (MWL-1) M67 to Bayonet Mount Converter (#83213) Rear Lens Cap for MWL-1/WWL-1 (#83221) Bayonet Mounting Ring for MWL-1(Pre-installed) Neoprene Cover Cleaning Cloth Carrying Bag Instruction Manual and Compatibility ChartIDENTIFICATION OF PARTS*There are two alignment pins at the bottom of the holder, by relocating the two screwsto the threaded holes around the holder, the position of the holder can be changedMOUNTING AND UN-MOUNTING THE LENSThe MWL-1 comes with M67 to Bayonet mount converter.Please refer to next section in order to convert M67 threaded port to Bayonetmount system.To mount the M67 to bayonet converter on Macro port before attachingthe MWL lens.Align the two positioning pins on the back of the converter with the slots onthe front of the port. Fasten the converter on the front of the port with thetool provided.To mount the lens on a port with bayonet mount system:Align the “I” mark on the lens with the “I” mark on the converter and then push it in.--- Continue on next page ---Eyelet for lanyardAlignment “I” markThumb screwsfor lens hood(4x)Lens hoodBayonet mounting ringLens alignmentdotLens releasebutton FasteningtoolPositioning pins(x2)Threaded holes forpositioning pin* (x6)M67 threadAll manuals and user guides at all-guides.comall-guides.com |
Related manuals for Nauticam 86201
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved