Subwoofer Gadget – Getting Started1. Power it upPlug it into a USB port and its red LED will light up to show that it’s working. (I assumethat the gadget gets the power from a PC USB port).2. Connect it to the audio sourceConnect the source such as the audio output of the TV, PC, subwoofer (pre) out, musicplayer, etc. to the 3.5mm socket input with label “PC/TV”.3. Connect it to your amplifierConnect the 3.5mm output socket with label “Hi-Fi” to the audio input of the amplifier oractive (self-powered) subwoofer.4. Use the bypass buttonUse a screwdriver to push the bypass button. The red LED will dim to show it is in bypasscondition/mode. Push it again to toggle it back the normal operation condition/mode.

Natural Bass Technology Subwoofer Gadget Getting Started

Product

Learn More

Legal