Native Instruments Scarbee Mark 1 User Manual

Contents

Native Instruments Scarbee Mark 1 User Manual Manual pdf 8 page image

Scarbee Mark I - User Manual – 82 The Instrument2.1 ProgramsThere are two programs to choose from: the standard “Scarbee MARK I” and the “ScarbeeMARK I - Stretched Tuned.” In stretched tuning, two notes an octave apart are tuned slightlyfurther apart to compensate for an acoustic phenomenon where you perceive the octave asbeing out of tune.2.2 Controls2.2.1 Original Noise adjustmentFor the MARK I, we recorded the original noise before we removed the noise from the samplesusing sophisticated noise-reduction. We made certain that samples were not degraded inquality after the removing the noise, not even the highest frequencies.The default setting is the exact original level of noise. Noise will play along with other sampleswhen you hit a key and since the noise sample is mapped to 1-note polyphony, you alwaysget the same amount of noise, no matter if you play 1 or 30 keys. Feel the magic when turn-ing down noise to zero!!• Instrument Noise Level: move the knob to set the level of the hum & hiss noise. Originalrecording level of the noise is middle position.