National Instruments PXI-1031 Installation Manual

Also see for NI PXI-1031: Installation guide User manual User manual User manual User manual

National Instruments PXI-1031 Installation Manual Manual pdf 1 page image

INSTALLATION GUIDENI PXI-1031 Rack Mount KitTo mount the NI PXI-1031 in an instrument rack, complete the followingsteps.1. Remove the bottom feet and COA label plate (as required) from theNI PXI-1031 chassis.2. Install the mounting brackets onto the front or rear of each side of thechassis using the M4 × 8 panhead screws and lock washers supplied.Notice that you can recess the chassis in the cabinet rack at .5 in.increments.3. Install the chassis in the instrument rack using four screws (notsupplied).Figure 1. NI PXI-1031 in Rack Mount Configuration1 Rubber Feet2 COA Label Plate3 Mounting Bracket (Qty. 2)4 Lock Washer (Qty. 8)5 M4 × 8 Panhead Screw (Qty. 8)23145

/ 2

Related manuals for National Instruments NI PXI-1031