National Instruments PXI-1006 Installation Manual

Also see for NI PXI-1006: User guide User manual

National Instruments PXI-1006 Installation Manual Manual pdf 1 page image

PXI ™ and National Instruments ™ are trademarks of National Instruments Corporation.323091A-01 © Copyright 2001 National Instruments Corp. All rights reserved. April 2001INSTALLATION GUIDEPXI -1006 RACK M OUNTTo mount the PXI-1006 in an instrument rack, follow the steps below.Figure 1. PXI-1006 in Rack Mount Configuration1. Remove the rubber feet and bottom feet (as required) from thePXI-1006 chassis.2. Install the mounting brackets onto each side of the chassis using theM4 x 8 flathead screws supplied. Note that you can recess the chassisin the cabinet rack at 1 in. increments up to 3 in. (For reverse mounting,install the brackets using the holes at the back of the chassis.)3. Install the chassis in the instrument rack using four screws (notsupplied).1 Mounting Bracket2 M4 x 8 Flathead Screw (Qty. 8)3 Rubber Feet4 Bottom Feet5 Holes for Reverse Mounting™1243514

/ 2

Related manuals for National Instruments NI PXI-1006