Menu
Napvo DXK4RF-433 Operating Manual
                                | |
Contents
| 
6A R M I N G AW A Y : S E T T I N G T H E AL A R M W H E N L E AV I N GArming the System1. Check the keypad. The green STATUS light must be on in order to arm.If the green light is off, the number(s) of any unsecured zone(s) will display in thewindow. Refer to the pull-up zone list for the location of each problem zone andsecure by closing windows, doors, etc. When all zones are secure, the greenSTATUS light will come on.2. Arm the system. Enter your User Code followed by q. The green STATUSlight will go off, the red ARMED light will come on. Note: If you enter an invalidcode, the keypad will beep 4 times, indicating an error. Re-enter your code.3. Leave the premises. Leave through the exit door before the exit time expires.Priority ArmingIf you attempt to arm the system with a faulted Zone, a 3-second tone will sound at thekeypad and “P” will display in the window, indicating that the zones must be securedbefore the panel can be armed.Selectively Bypassing ZonesIf you cannot locate or repair a faulted zone, it can be removed from the system, orbypassed. Bypass the zone(s) from the system by pressing x, followed by thezone number (or vice versa). The BYPASS icon will turn on to indicate that the zonehas been bypassed. Note: Bypassed zones are unprotected. If a faulted zonecannot be secured, have the system checked as soon as possible. In addition, somesystems require a User Code to be entered prior to pressing x (for higher secu-rity). Please consult with your alarm professional to see if this option is programmed(GEM-P9600/GEM-P3200).CHIME12CHIMEPCHIMEBYPASS |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved