Position 01Position 02Position 03Position 04Position 05Position 06The HDD cage can easily bemoved to another position ifnecessary. To do this, pleasefirst remove the four screwsthat hold the cage on thebottom. Please refer to thedrawing for the differentmounting points of the cage.4. Removing the front panel and top coverPlease note that you should always remove the front cover first before you remove the topcover.4.1 Removing the front panelTo remove the front panel, simply hold thecut-out at the bottom of the front panel andpull it towards you with a firm tug.4.2 Removing the top coverTo remove the lid of the case, hold therecess provided at the rear of the case andpull it upwards with a firm tug.When you remove the top cover, proceedcautiously in order to not damage thecables of the I/O-Panel and the Active AirChimney.To remove the cover completely, you needto remove the right side panel and discon-nect the cable to the board that goes tothe switch of the Active Air Chimney (seedrawing).FAN3 FAN2 FAN1POWER SWITCH11