Menu
Nakanishi E4000-PB Operation Manual
Also see for E4000-PB: Operation manual
 |
OPERATION MANUAL 2015.01 .20 0001 הThank you for purchasing BOX for Control Panel E4000 - PB. This " BOX for Control Panel "is designed for can be attach the Control Panel. Read this and Control Panel ExtensionCord Operation Manuals carefully before use. Always keep this Operation Manual in aplace where a user can referred to for reference at any time.BOX for Control PanelE4000 - PB1 - 1 SpecificationsProduct Name BOX for Control PanelModel E4000 - PBApplicable Products E4000 Control Panel, E4000 Control Panel Extension CordWeight 216gStandard AccessoriesMounting Screw (M3) 6pcs.Blind Plate 1pc.Mounting Screw (M4) 2pcs.Operation Manual 1set.1 - 2 Standard AccessoriesConfirm the following Accessories after opened the Packing Box.Case A Case BBlind Plate Mounting Screw (M4)Mounting Screw (M3)Mounting Screw (M4)Mounting Screw (M3)Fig. 11 - 3 Outside View88 25 1.2 120881352-ȭ4.5CAUTIONBe sure to read and understand the Control Panel Extension Cord OperationManual before installation.Attach the Control Panel to the Case A by using the Mounting Screw (M3 : StandardAccessories) 4 positions (Fig. 6).Fig. 5Case A Control Panel: MountingScrew (M3)Fig. 6Connect the connector of theControl Panel Extension Cord tothe connector of the Control Panel.ConnectorFig. 7Mount the Case B to the Case Aby using Mounting Screw (M3 :Standard Accessories) 4 positions.: MountingScrew (M3)Case BCase AFig. 83 . INSTALLATION OF THE BOX FOR CONTROL PANEL3 - 1 Rear Mounting1 . SPECIFICATIONS AND DIMENSIONSMount the Blind Plate to Case B by using Mounting Screw (M3 : Standard Accessories)2 positions.Mount the Blind Plate to the Installation location by using Mounting Screw (M4 :Standard Accessories) 2 positions.Blind Plate: Mounting Screw (M3): Mounting Screw (M3)Fig. 9: Mounting Screw (M4): Mounting Screw (M4)Fig. 103 - 2 Bottom MountingBlind Plate: Mounting Screw (M3)Fig. 11: Mounting Screw (M4)Fig. 12Mount the Blind Plate to bottom of the Case A by using Mounting Screw (M3 :Standard Accessories) 2 positions.Mount the Blind Plate to the Installation location by using Mounting Screw (M4 :Standard Accessories) 2 positions.Rear MountingBottom MountingTapping Mounting2513512088881.22-ȭ4.52-M3 x 0.525 707088884412.52- M3 x 0.5Fig. 2Fig. 3Fig. 42 . INSTALLATION OF THE CONTROL PANEL AND BOX FOR CONTROL PANELWARNINGTurn OFF the Main Power Switch of the CONTROLLER before ControlPanel Extension Cord mounting.When attaching the Control Panel, protect the Control Panel from oil andother contaminants.Take care when selecting routing of cord of Control Panel to insure thatthe cord is not routed near potential sources of RF noise.Attach the Control Panel in manner to insure that the back of the circuitboard of the Control Panel does not contact any object or surface thatcould cause potential short circuit.4 . DISPOSAL OF THIS PRODUCTSWhen disposal of E4000 - PB is necessary, follow the instructions from your localgovernment agency for proper disposal of electrical components .Temperature Humidity AtmosphericPressureOperation Environment 0 - 40°C MAX.75%(No condensation) 700 - 1,060hPaTransportation andStorage Environment -10 - + 50°C 10 - 85% 500 - 1,060hPa |
Related manuals for Nakanishi E4000-PB
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved