19• Sector protection- Sector protect/chip unprotect for 5V/12V system.- Hardware method to disable any combination ofsectors from program or erase operations- Tempory sector unprotect allows code changes inpreviously locked sectors.• 100,000 minimum erase/program cycles• Latch-up protected to 100mA from -1V to VCC+1V• Boot Code Sector Architecture- T = Top Boot Sector- B = Bottom Boot Sector• Low VCC write inhibit is equal to or less than 3.2V• Package type:- 44-pin SOP- 48-pin TSOP• Compatibility with JEDEC standard- Pinout and software compatible with single-powersupply Flash
