Menu
NEMI Power Soccer Shop Strike Force Kill Switch Directions
   |
Page 1-2: StrikForce UsersPage 3: Non-StrikForce Users 1Kill Switch DirectionsStrikForce Users3 Plug Options with Keyfob "Charger Port" Plug........Page 1 Wireless Power Module Plug........Page 2 Wired to joystick Power Module Plug........Page 2("Charger Port" Plug) (In chair) Push the plug into the Charger Port just like you would if you were going to charge the chair.(After rotation)If the user is in trouble:1. Push the button on the keyfob.** This will stop the chair from moving. The chair will then act as if it just got plugged into the charger2. To be able to resume driving, you must Power off the chair first.3. When you are comfortable and ready/able to drive properly again, turn the powerback on again. **Make sure the joystick is centered before the chair is turned on again.**If the chair will not reset (just showing the battery bars and acting like it's charging), push thebutton on the keyfob again to reset the joystick and go to step 2. **This WILL NOT reset joystick settingsand the chair WILL NOT resume driving after the second button push.If the plug does not fit in the receiver due tomounts or tubing:1. You are able to rotate the plugs. Once you open thehousing by loosening the two screws with a smallAllen Wrench.2. Once inside, you are able to turn the plugs by 45oincrements. You may have to move the plugs up anddown to get it to move and fit properly. ***DONOT TURN it passed 90o (two turns) in bothdirections.3. If you notice the wires are tight in the housing, twistthe black mechanism right above the housing untilthe wires are no longer tight. |
Related manuals for NEMI Power Soccer Shop Strike Force Kill Switch
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved