NEFF V6320X0EU Install And Operation Instructions

NEFF V6320X0EU Install And Operation Instructions Manual pdf 13 page image

13Washing and drying optionsB (Spin speed) button The spin speed can be individually adjusted for each programme.To set the spin speed, press the B (Spin) button repeatedly until therequired spin speed is displayed.$ (Rinse stop) deactivates the spin function.The laundry remains in the rinsing water.The automatic unbalanced load detection system ensures that the laundryis evenly distributed using several initial spins. If the laundry is extremelyunevenly distributed, the speed of the final spin is reduced or the spincycle is not performed for safety reasons.Menu buttonSet buttonThe set washing programmes can be individually adjusted.To choose the required washing option: press the Menu button repeatedly until the required washing option isselected (indicator lamp flashes). Press the Set button to switch the washing option on or off (indicatorlamp is lit/not lit).If you press and hold the Menu button, the appliance scrolls through allthe washing options.Washing optionsT - (Prewash) Prewash at 35 °C. Suitable for heavily soiled laundry.X - (Intensive) Prolonged washing time. Suitable for heavily soiled laundry with dried-onstains. Cannot be combined with R Flexi Time.Q - (Easy-iron) Special spin sequence with subsequent fluffing. Gentle final spin atreduced speed. Slightly increased residual moisture in the laundry.Reduces creasing and laundry is easier to iron.Z - (Water Plus) Increased water level and additional rinse cycle. For regions with very softwater or for further improving the rinsing result. Any detergent residuesare better removed.R - Flexi Time Sets the washing time: normal-medium-short.C - Signal Activates or deactivates the audible signal.3 (Finished in time)buttonYou can postpone the start of the programme before it begins. Using theremaining time, you can determine when the selected programme is toend. The remaining time can be set in one-hour increments, up to amaximum of 24 hours. Press the 3 (Finished in) button repeatedly untilthe required number of hours is displayed.Then press the A (Start/Pause) button. The programme will start after adelay according to the set remaining time. The time required until the endof the programme is shown on the display.Rinse HoldUnbalanced loaddetection systemi