en Cleaning and maintenance12Selecting a fan setting▶ Set the control knob to any fan set-ting.Switching off the appliance▶ Set the control knob to .Switching on the lighting1. Set the control knob to .2. To use the lighting at the same timeas a fan setting, set the control knobto , or .Switching off the lighting▶ Set the control knob to .Cleaning and mainten-anceTo keep your appliance looking its bestand working efficiently for a long time,it is important to clean and maintain itcarefully.Cleaning productsYou can obtain suitable cleaningproducts from after-sales service or theonline shop.WARNINGRisk of electric shock!Penetrating moisture may cause elec-tric shock.▶ Do not use any steam cleaners orhigh-pressure cleaners to clean theappliance.ATTENTION!Unsuitable cleaning products maydamage the surfaces of the appliance.▶ Do not use harsh or abrasive deter-gents.▶ Do not use cleaning products with ahigh alcohol content.▶ Do not use hard scouring pads orcleaning sponges.▶ Do not use any special cleaners forcleaning the appliance while it is hot.▶ Do not use limescale remover on thedoor handle or control panel, as itmay leave permanent staining.▶ Only use glass cleaners, glassscrapers or stainless steel careproducts if recommended in thecleaning instructions for the relevantpart.▶ Wash sponge cloths thoroughly be-fore use.Cleaning the stainless steelsurfaces1. Observe the information regardingthe cleaning agents.→ "Cleaning products", Page 122. Clean using a sponge cloth and hotsoapy water in the direction of thefinish.3. Dry with a soft cloth.4. Apply a thin layer of the stainlesssteel cleaning product with a softcloth.Tip: You can obtain stainless steelcleaning products from after-sales ser-vice or the online shop.Cleaning painted surfaces1. Observe the information regardingthe cleaning agents.→ "Cleaning products", Page 122. Clean using a sponge cloth and hotsoapy water in the direction of thefinish.3. Dry with a soft cloth.