NEC Display Solutions of America, Inc.X462S Installation Guide46” LCD Display Rev 1.0www.necdisplay.com X462S Page 1 of 8Contents:Product Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Requirements Page 2Display Dimensions Page 3Display Dimensions Page 4Optional Table Top Stand Dimensions Page 5Dimensions of Optional Wall Mount (WMK-4655S) Page 6Input Terminals Page 7Control Codes Page 8Product DescriptionType: LCD Display Screen Surface: Anti-ReflectiveResolution: 1920 x 1080 Dimensions without stand: 41.7”(W) x 24.1”(H) x 1.8”(D)Aspect Ratio: 16:9 Dimensions with stand: 41.7”(W) x 25.6”(H) x 13.0” (D)FCC: Class B Weight without stand: 45.6 lbs / 20.7 kgPower Consumption: 110W (typ) Weight with stand: 49.6 lbs / 22.5 kgBTU’s: 375.34 BTU/hour Built-In SpeakerNOTES: This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontallyto fill the screen using the menus (see “Aspect Modes” in menus and user manual). Distances are in inches, for millimeters multiply by 25.4.Tilt Angle and RotationMonitor may be angled and rotated from normal landscape and portrait orientation to both face up and face down positioning. Whenorientated in face up or face down position, operating temperature for the unit changes. Rotate only clockwise for portrait orientation. Operating Temperatures:o Landscape: 5-40° Celsius; 41-104° Fahrenheit Face Up: 5-35° Celsius; 41-95° Fahrenheito Portrait: 5-40° Celsius; 41-104° Fahrenheit Face Down: 5-35° Celsius; 41-95° Fahrenheit